# Makefile.in generated by automake 1.8.5 from Makefile.am.
# docs/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/pygobject
pkglibdir = $(libdir)/pygobject
pkgincludedir = $(includedir)/pygobject
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/local/bin/ginstall -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = i486-slackware-linux-gnu
subdir = docs
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(mkdir_p)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
am__installdirs = "$(DESTDIR)$(CSSdir)" "$(DESTDIR)$(XSLdir)"
CSSDATA_INSTALL = $(INSTALL_DATA)
XSLDATA_INSTALL = $(INSTALL_DATA)
DATA = $(CSS_DATA) $(XSL_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /sda3/XXX/F/pygobject-2.14.2/missing --run aclocal-1.8 
ACLOCAL_AMFLAGS = -I m4 -I .
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /sda3/XXX/F/pygobject-2.14.2/missing --run tar
AR = ar
AS = as
AUTOCONF = ${SHELL} /sda3/XXX/F/pygobject-2.14.2/missing --run autoconf
AUTOHEADER = ${SHELL} /sda3/XXX/F/pygobject-2.14.2/missing --run autoheader
AUTOMAKE = ${SHELL} /sda3/XXX/F/pygobject-2.14.2/missing --run automake-1.8
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -Wall -fno-strict-aliasing -std=c9x
CPP = gcc -E
CPPFLAGS =  
CYGPATH_W = echo
DATADIR = ${prefix}/share
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DSYMUTIL = 
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
ENABLE_DOCS_FALSE = 
ENABLE_DOCS_TRUE = #
EXEEXT = 
FFI_LIBS = -lffi 
GLIB_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
GLIB_GENMARSHAL = glib-genmarshal
GLIB_LIBS = -pthread -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0
GLIB_MKENUMS = glib-mkenums
GOBJECT_QUERY = gobject-query
GREP = /bin/grep
HAVE_LIBFFI_FALSE = #
HAVE_LIBFFI_TRUE = 
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LDFLAGS = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /sda3/XXX/F/pygobject-2.14.2/missing --run makeinfo
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OS_WIN32_FALSE = 
OS_WIN32_TRUE = #
PACKAGE = pygobject
PACKAGE_BUGREPORT = http://bugzilla.gnome.org/enter_bug.cgi?product=pygobject
PACKAGE_NAME = pygobject
PACKAGE_STRING = pygobject 2.14.2
PACKAGE_TARNAME = pygobject
PACKAGE_VERSION = 2.14.2
PATH_SEPARATOR = :
PKG_CONFIG = /usr/local/bin/pkg-config
PLATFORM = linux-i686
PLATFORM_WIN32_FALSE = 
PLATFORM_WIN32_TRUE = #
PYGOBJECT_MAJOR_VERSION = 2
PYGOBJECT_MICRO_VERSION = 2
PYGOBJECT_MINOR_VERSION = 14
PYTHON = /usr/local/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_INCLUDES = -I/usr/include/python2.5
PYTHON_PLATFORM = linux2
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 2.5
RANLIB = ranlib
SED = /usr/local/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
THREADING_CFLAGS = 
VERSION = 2.14.2
XSLTPROC = 
ac_ct_CC = gcc
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
bindir = ${exec_prefix}/bin
build = i486-slackware-linux-gnu
build_alias = i486-slackware-linux
build_cpu = i486
build_os = linux-gnu
build_vendor = slackware
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = i486-slackware-linux-gnu
host_alias = 
host_cpu = i486
host_os = linux-gnu
host_vendor = slackware
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = /sda3/XXX/F/pygobject-2.14.2/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = mkdir -p -- .
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/pygobject
pkgpythondir = ${pythondir}/pygobject
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${exec_prefix}/lib/python2.5/site-packages
pygobject_CODEGEN_DEFINES = 
pythondir = ${prefix}/lib/python2.5/site-packages
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target_alias = 
REF_VERSION = $(PYGOBJECT_MAJOR_VERSION).$(PYGOBJECT_MINOR_VERSION)
FULL_VERSION = $(REF_VERSION).$(PYGOBJECT_MICRO_VERSION)
BUILDDIR = $(top_builddir)/docs
CSS_FILES = style.css
HTML_FILES = \
	html/class-gobjectgboxed.html		\
	html/class-gobjectginterface.html	\
	html/class-gobjectgpointer.html		\
	html/class-gobject.html			\
	html/class-gobjectmaincontext.html	\
	html/class-gobjectmainloop.html		\
	html/gobject-class-reference.html	\
	html/gobject-constants.html		\
	html/gobject-functions.html		\
	html/index.html				\
	html/index.sgml				\
	html/pygobject.devhelp			\
	html/pygobject-introduction.html

XML_FILES = \
	reference/pygobject.xml			\
	reference/pygobject-introduction.xml 	\
	reference/pygobject-classes.xml 	\
	reference/pygobject-constants.xml 	\
	reference/pygobject-ref.xml		\
	reference/pygobject-functions.xml	\
	reference/pygobject-gboxed.xml		\
	reference/pygobject-ginterface.xml 	\
	reference/pygobject-gpointer.xml 	\
	reference/pygobject-maincontext.xml 	\
	reference/pygobject-mainloop.xml

XSL_FILES = \
	xsl/common.xsl 		\
	xsl/devhelp.xsl		\
	xsl/html.xsl 		\
	xsl/pdf-style.xsl 	\
	xsl/pdf.xsl		\
	xsl/ref-html-style.xsl


# fixxref cannot be included in XSL_FILES, because automake is touching it
# so the date is newer then the files in HTML_FILES
FIXXREF = xsl/fixxref.py
TARGET_DIR = $(datadir)/gtk-doc/html/pygobject
CSSdir = $(TARGET_DIR)
CSS_DATA = $(CSS_FILES)
XSLdir = $(datadir)/pygobject/xsl
XSL_DATA = $(XSL_FILES) $(FIXXREF)
EXTRA_DIST = \
	$(HTML_FILES) 	\
	$(XML_FILES) 	\
	$(XSL_FILES) 	\
	$(FIXXREF) 	\
	$(CSS_FILES)

#BUILT_SOURCES = reference/builddate.xml $(HTML_FILES)
#CLEANFILES = reference/builddate.xml $(HTML_FILES)
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  docs/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  docs/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-CSSDATA: $(CSS_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(CSSdir)" || $(mkdir_p) "$(DESTDIR)$(CSSdir)"
	@list='$(CSS_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(CSSDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(CSSdir)/$$f'"; \
	  $(CSSDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(CSSdir)/$$f"; \
	done

uninstall-CSSDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(CSS_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f '$(DESTDIR)$(CSSdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(CSSdir)/$$f"; \
	done
install-XSLDATA: $(XSL_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(XSLdir)" || $(mkdir_p) "$(DESTDIR)$(XSLdir)"
	@list='$(XSL_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(XSLDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(XSLdir)/$$f'"; \
	  $(XSLDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(XSLdir)/$$f"; \
	done

uninstall-XSLDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(XSL_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f '$(DESTDIR)$(XSLdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(XSLdir)/$$f"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/html $(distdir)/reference $(distdir)/xsl
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(CSSdir)" "$(DESTDIR)$(XSLdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-CSSDATA install-XSLDATA install-data-local

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-CSSDATA uninstall-XSLDATA uninstall-info-am \
	uninstall-local

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am html html-am info info-am install install-CSSDATA \
	install-XSLDATA install-am install-data install-data-am \
	install-data-local install-exec install-exec-am install-info \
	install-info-am install-man install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall \
	uninstall-CSSDATA uninstall-XSLDATA uninstall-am \
	uninstall-info-am uninstall-local


install-data-local:
	installfiles=`echo $(srcdir)/html/*`; \
	if test "$$installfiles" = '$(srcdir)/html/*'; \
	then echo '-- Nothing to install' ; \
	else \
	  $(mkinstalldirs) $(DESTDIR)$(TARGET_DIR); \
	  for i in $$installfiles; do \
	    echo '-- Installing '$$i ; \
	    $(INSTALL_DATA) $$i $(DESTDIR)$(TARGET_DIR); \
	  done; \
	  echo '-- Installing $(srcdir)/html/index.sgml' ; \
	  $(INSTALL_DATA) $(srcdir)/html/index.sgml $(DESTDIR)$(TARGET_DIR) || :; \
	fi

uninstall-local:
	rm -f $(DESTDIR)$(TARGET_DIR)/*

reference/builddate.xml:
	@$(PYTHON) -c 'import datetime; print datetime.date.today()' > $@

# Do not add a builddate.xml dependency here, because the generated html 
# documentation will be included in the tarball so xsltproc is not needed to 
# install the documentation. Adding a builddate.xml dependency will force 
# the documentation to be rebuilt when it doesn't need to be.
#$(HTML_FILES): $(XML_FILES) $(XSL_FILES)
#	@xsltproc --nonet --xinclude -o $(BUILDDIR)/html/ \
#		 --path $(BUILDDIR)/reference:$(srcdir)/reference \
#                 --stringparam gtkdoc.bookname "pygobject" \
#                 --stringparam gtkdoc.version ${REF_VERSION} \
#                 $(srcdir)/xsl/ref-html-style.xsl \
#                 $(srcdir)/reference/pygobject-ref.xml

# pdf: $(REFERENCE_DEPS) reference/builddate.xml
# 	xsltproc --nonet --xinclude -o pygobject-ref.fo xsl/pdf-style.xsl \
# 		reference/pygobject-ref.xml
# 	pdfxmltex pygobject-ref.fo >output </dev/null
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
