# Makefile.in generated by automake 1.10 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




pkgdatadir = $(datadir)/libgphoto2
pkglibdir = $(libdir)/libgphoto2
pkgincludedir = $(includedir)/libgphoto2
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i486-slackware-linux-gnu
host_triplet = i486-slackware-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4m/gp-byteorder.m4 \
	$(top_srcdir)/m4m/gp-camlibs.m4 \
	$(top_srcdir)/m4m/gp-check-doxygen.m4 \
	$(top_srcdir)/m4m/gp-check-library.m4 \
	$(top_srcdir)/m4m/gp-check-shell-environment.m4 \
	$(top_srcdir)/m4m/gp-config-msg.m4 \
	$(top_srcdir)/m4m/gp-documentation.m4 \
	$(top_srcdir)/m4m/gp-gettext-hack.m4 \
	$(top_srcdir)/m4m/gp-libltdl.m4 \
	$(top_srcdir)/m4m/gp-packaging.m4 \
	$(top_srcdir)/m4m/gp-pkg-config.m4 \
	$(top_srcdir)/m4m/gp-references.m4 \
	$(top_srcdir)/m4m/gp-stdint.m4 $(top_srcdir)/m4m/gp-udev.m4 \
	$(top_srcdir)/auto-m4/gettext.m4 \
	$(top_srcdir)/auto-m4/iconv.m4 $(top_srcdir)/auto-m4/lib-ld.m4 \
	$(top_srcdir)/auto-m4/lib-link.m4 \
	$(top_srcdir)/auto-m4/lib-prefix.m4 \
	$(top_srcdir)/auto-m4/nls.m4 $(top_srcdir)/auto-m4/po.m4 \
	$(top_srcdir)/auto-m4/progtest.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/auto-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = Doxyfile
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
man3dir = $(mandir)/man3
am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(docdir)"
NROFF = nroff
MANS = $(man_MANS)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(doc_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /sda3/XXX/libgphoto2-2.4.2/auto-aux/missing --run aclocal-1.10
ALL_CURRENT_CAMLIBS = adc65 agfa_cl20 aox barbie canon casio_qv clicksmart310 digigr8 digita dimera3500 directory enigma13 fuji gsmart300 hp215 iclick jamcam jd11 kodak_dc120 kodak_dc210 kodak_dc240 kodak_dc3200 kodak_ez200 konica konica_qm150 largan lg_gsm mars dimagev mustek panasonic_coolshot panasonic_l859 panasonic_dc1000 panasonic_dc1580 pccam300 pccam600 polaroid_pdc320 polaroid_pdc640 polaroid_pdc700 ptp2 ricoh ricoh_g3 samsung sierra sipix_blink2 sipix_web2 smal sonix sony_dscf1 sony_dscf55 soundvision spca50x sq905 stv0674 stv0680 sx330z topfield toshiba_pdrm11
ALL_DEFINED_CAMLIBS = adc65 agfa_cl20 aox barbie canon casio_qv clicksmart310 digigr8 digita dimera3500 directory enigma13 fuji gsmart300 hp215 iclick jamcam jd11 kodak_dc120 kodak_dc210 kodak_dc240 kodak_dc3200 kodak_ez200 konica konica_qm150 largan lg_gsm mars dimagev mustek panasonic_coolshot panasonic_l859 panasonic_dc1000 panasonic_dc1580 pccam300 pccam600 polaroid_pdc320 polaroid_pdc640 polaroid_pdc700 ptp2 ricoh ricoh_g3 samsung sierra sipix_blink2 sipix_web2 smal sonix sony_dscf1 sony_dscf55 soundvision spca50x sq905 stv0674 stv0680 sx330z topfield toshiba_pdrm11 sipix_blink template
AMTAR = ${SHELL} /sda3/XXX/libgphoto2-2.4.2/auto-aux/missing --run tar
AM_CFLAGS =  -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes
AM_CPPFLAGS =  -I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/libgphoto2_port -I$(top_srcdir)/libgphoto2 -I$(top_builddir)/libgphoto2  -Wall -g -D_GPHOTO2_INTERNAL_CODE -DLOCALEDIR=\"$(datadir)/locale\" -DCAMLIBS=\"$(camlibdir)\"
AM_CXXFLAGS =  -g -O2
AM_LDFLAGS =   -Wall -g
AR = ar
AS = as
AUTOCONF = ${SHELL} /sda3/XXX/libgphoto2-2.4.2/auto-aux/missing --run autoconf
AUTOHEADER = ${SHELL} /sda3/XXX/libgphoto2-2.4.2/auto-aux/missing --run autoheader
AUTOMAKE = ${SHELL} /sda3/XXX/libgphoto2-2.4.2/auto-aux/missing --run automake-1.10
AWK = gawk
BISON = /usr/local/bin/bison
BUILD_THESE_CAMLIBS =  adc65.la agfa_cl20.la aox.la barbie.la canon.la casio_qv.la clicksmart310.la digigr8.la digita.la dimera3500.la directory.la enigma13.la fuji.la gsmart300.la hp215.la iclick.la jamcam.la jd11.la kodak_dc120.la kodak_dc210.la kodak_dc240.la kodak_dc3200.la kodak_ez200.la konica.la konica_qm150.la largan.la lg_gsm.la mars.la dimagev.la mustek.la panasonic_coolshot.la panasonic_l859.la panasonic_dc1000.la panasonic_dc1580.la pccam300.la pccam600.la polaroid_pdc320.la polaroid_pdc640.la polaroid_pdc700.la ptp2.la ricoh.la ricoh_g3.la samsung.la sierra.la sipix_blink2.la sipix_web2.la smal.la sonix.la sony_dscf1.la sony_dscf55.la soundvision.la spca50x.la sq905.la stv0674.la stv0680.la sx330z.la topfield.la toshiba_pdrm11.la
CAMLIB_LDFLAGS = -module -no-undefined -avoid-version -export-dynamic -export-symbols $(top_srcdir)/camlibs/camlib.sym
CAMLIB_LIBS = $(top_builddir)/libgphoto2/libgphoto2.la
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS =  -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes
CPP = gcc -E
CPPFLAGS =  -I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/libgphoto2_port -I$(top_srcdir)/libgphoto2 -I$(top_builddir)/libgphoto2  -Wall -g -D_GPHOTO2_INTERNAL_CODE
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DOT = /usr/local/bin/dot
DOXYGEN = /usr/local/bin/doxygen
DOXYGEN_OUTPUT_DIR = doxygen-output
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
F77 = g77
FFLAGS = -g -O2
FLEX = /usr/local/bin/flex
GETTEXT_PACKAGE = libgphoto2-2
GMSGFMT = /usr/local/bin/msgfmt
GREP = /bin/grep
GTKDOC = 
HAVE_DOT = YES
HTML_APIDOC_DIR = libgphoto2-api.html
HTML_APIDOC_INTERNALS_DIR = libgphoto2-internals.html
INSTALL = /usr/local/bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTLLIBS = 
LDFLAGS = 
LIBEXIF_CFLAGS = -I/usr/include/libexif  
LIBEXIF_CONFIG_PROG = 
LIBEXIF_LIBS = -lexif -lm  
LIBGPHOTO2_AGE = 3
LIBGPHOTO2_CURRENT = 5
LIBGPHOTO2_CURRENT_MIN = 2
LIBGPHOTO2_REVISION = 0
LIBGPHOTO2_VERSION_INFO = 5:0:3
LIBICONV = 
LIBINTL = 
LIBJPEG = -ljpeg
LIBLTDL = -lltdl
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBUSB_CONFIG = /usr/local/bin/libusb-config
LN_S = ln -s
LTDLINCL = 
LTLIBICONV = 
LTLIBINTL = 
LTLIBOBJS = 
MAIL_GPHOTO_DEVEL = <gphoto-devel@lists.sourceforge.net>
MAIL_GPHOTO_TRANSLATION = <gphoto-translation@lists.sourceforge.net>
MAIL_GPHOTO_USER = <gphoto-user@lists.sourceforge.net>
MAKEINFO = ${SHELL} /sda3/XXX/libgphoto2-2.4.2/auto-aux/missing --run makeinfo
MKDIR_P = /usr/local/bin/mkdir -p
MKINSTALLDIRS = $(top_builddir)/auto-aux/mkinstalldirs
MSGFMT = /usr/local/bin/msgfmt
MSGMERGE = /usr/local/bin/msgmerge
NO_UNUSED_CFLAGS = -Wno-unused
OBJDUMP = objdump
OBJEXT = o
PACKAGE = libgphoto2
PACKAGE_BUGREPORT = gphoto-devel@lists.sourceforge.net
PACKAGE_NAME = libgphoto2 photo camera library
PACKAGE_STRING = libgphoto2 photo camera library 2.4.2
PACKAGE_TARNAME = libgphoto2
PACKAGE_VERSION = 2.4.2
PATH_SEPARATOR = :
PKG_CONFIG = /usr/local/bin/pkg-config
PKG_CONFIG_PATH = /usr/local/lib/pkgconfig:/usr/lib/pkgconfig
POSUB = po
RANLIB = ranlib
REQUIREMENTS_FOR_LIBEXIF = libexif >= 0.6.13
RPMBUILD = rpmbuild
SED = /usr/local/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
URL_DIGICAM_LIST = http://www.teaser.fr/~hfiguiere/linux/digicam.html
URL_GPHOTO_HOME = http://www.gphoto.org/
URL_GPHOTO_PROJECT = http://sourceforge.net/projects/gphoto
URL_JPHOTO_HOME = http://jphoto.sourceforge.net/
URL_USB_MASSSTORAGE = http://www.linux-usb.org/USB-guide/x498.html
USE_NLS = yes
VERSION = 2.4.2
XGETTEXT = /usr/local/bin/xgettext
abs_builddir = /sda3/XXX/libgphoto2-2.4.2/doc
abs_srcdir = /sda3/XXX/libgphoto2-2.4.2/doc
abs_top_builddir = /sda3/XXX/libgphoto2-2.4.2
abs_top_srcdir = /sda3/XXX/libgphoto2-2.4.2
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = g77
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
apidocdir = ${prefix}/share/doc/libgphoto2/html/api
bindir = ${exec_prefix}/bin
build = i486-slackware-linux-gnu
build_alias = i486-slackware-linux
build_cpu = i486
build_os = linux-gnu
build_vendor = slackware
builddir = .
camlibdir = ${libdir}/libgphoto2/2.4.2
camlibdocdir = ${docdir}/camlibs
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${prefix}/share/doc/libgphoto2
dvidir = ${docdir}
effective_target = i486-slackware-linux-gnu
exec_prefix = ${prefix}
host = i486-slackware-linux-gnu
host_alias = 
host_cpu = i486
host_os = linux-gnu
host_vendor = slackware
hotplugdocdir = ${prefix}/share/doc/libgphoto2/linux-hotplug
hotplugusermapdir = ${prefix}/share/doc/libgphoto2/linux-hotplug
htmldir = ${prefix}/share/doc/libgphoto2/html
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /sda3/XXX/libgphoto2-2.4.2/auto-aux/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = $(datadir)/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /usr/local/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgconfigdir = ${libdir}/pkgconfig
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
subdirs =  libgphoto2_port
sysconfdir = ${prefix}/etc
target_alias = 
top_builddir = ..
top_srcdir = ..
udevscriptdir = ${libdir}/udev
utilsdir = ${libdir}/${PACKAGE_TARNAME}
SUBDIRS = api
old_EXTRA_DIST = DAEMON build_OS2.txt 					\
	camlib_devel.lyx 						\
	camlib_devel-portmon.eps camlib_devel-repeater.eps 		\
	camlib_devel.sgml camlib_devel.txt camlib_devel-y.eps 		\
	frontend_devel.lyx frontend_devel.sgml frontend_devel.txt 	\
	libgphoto2.3 libgphoto2_port.3

man_MANS = libgphoto2.3 libgphoto2_port.3

# doc_DATA = FAQ faq.xml
########################################################################
# Conditional rules, depending on tool availability
########################################################################
DOXYGEN_FILES = 
DOXYGEN_STAMPS = $(DOXYGEN_OUTPUT_DIR).stamp
DOC_APIDOC_HTML = apidocs.html
doc_EXTRA_DIST = $(HTML_APIDOC_DIR).tar.gz 
doc_DATA = $(DOXYGEN_FILES) README.apidocs
CLEANFILES = $(DOXYGEN_FILES) $(DOXYGEN_STAMPS)

########################################################################
# Common part
########################################################################
EXTRA_DIST = $(doc_EXTRA_DIST) Doxyfile.in README.apidocs $(old_EXTRA_DIST)
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man3: $(man3_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.3*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    3*) ;; \
	    *) ext='3' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \
	done
uninstall-man3:
	@$(NORMAL_UNINSTALL)
	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.3*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    3*) ;; \
	    *) ext='3' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man3dir)/$$inst"; \
	done
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
	@list='$(doc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
#all-local:
all-am: Makefile $(MANS) $(DATA) all-local
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#uninstall-local:
#install-data-local:
#clean-local:
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-data-local install-docDATA install-man

install-dvi: install-dvi-recursive

install-exec-am:

install-html: install-html-recursive

install-info: install-info-recursive

install-man: install-man3

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-docDATA uninstall-local uninstall-man

uninstall-man: uninstall-man3

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am all-local check check-am clean clean-generic \
	clean-libtool clean-local ctags ctags-recursive distclean \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-local \
	install-docDATA install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man3 install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-docDATA \
	uninstall-local uninstall-man uninstall-man3


# FIXME: Depend on source files.
$(DOXYGEN_OUTPUT_DIR).stamp: Doxyfile
	doxygen Doxyfile
	echo > $@

$(HTML_APIDOC_DIR).tar.gz: $(DOXYGEN_OUTPUT_DIR).stamp
	(cd $(DOXYGEN_OUTPUT_DIR) && $(AMTAR) chof - $(HTML_APIDOC_DIR) | GZIP=--best gzip -c) > $@

install-apidocs: $(DOXYGEN_OUTPUT_DIR).stamp
	$(INSTALL) -m 0755 -d $(DESTDIR)$(docdir)/$(DOC_APIDOC_HTML)
	$(INSTALL) -m 0644 $(DOXYGEN_OUTPUT_DIR)/$(HTML_APIDOC_DIR)/* $(DESTDIR)$(docdir)/$(DOC_APIDOC_HTML)/

uninstall-apidocs:
	cd "$(DESTDIR)$(docdir)" && rm -f $(DOC_APIDOC_HTML)/*
	rmdir $(DESTDIR)$(docdir)/$(DOC_APIDOC_HTML)

clean-apidocs:
	rm -rf $(DOXYGEN_OUTPUT_DIR)
	rm -f $(DOXYGEN_OUTPUT_DIR).stamp
	rm -f $(HTML_APIDOC_DIR).tar.gz

# if we ever have more targets, move those out...

all-local: $(DOXYGEN_STAMPS)

install-data-local: install-apidocs

uninstall-local: uninstall-apidocs

clean-local: clean-apidocs
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
