# Makefile.in generated by automake 1.11 from Makefile.am.
# docs/reference/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# -*- mode: makefile -*-

####################################
# Everything below here is generic #
####################################

pkgdatadir = $(datadir)/libgdata
pkgincludedir = $(includedir)/libgdata
pkglibdir = $(libdir)/libgdata
pkglibexecdir = $(libexecdir)/libgdata
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i486-slackware-linux-gnu
host_triplet = i486-slackware-linux-gnu
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/version.xml.in $(top_srcdir)/gtk-doc.make
subdir = docs/reference
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = version.xml
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /GNOME-2.28/libgdata-0.5.0/missing --run aclocal-1.11
ACLOCAL_AMFLAGS = ${ACLOCAL_FLAGS}
ALL_LINGUAS = 
AMTAR = ${SHELL} /GNOME-2.28/libgdata-0.5.0/missing --run tar
AM_CFLAGS = 
AM_CPPFLAGS = 
AM_CXXFLAGS = 
AM_DEFAULT_VERBOSITY = 0
AM_LDFLAGS = 
AR = ar
AUTOCONF = ${SHELL} /GNOME-2.28/libgdata-0.5.0/missing --run autoconf
AUTOHEADER = ${SHELL} /GNOME-2.28/libgdata-0.5.0/missing --run autoheader
AUTOMAKE = ${SHELL} /GNOME-2.28/libgdata-0.5.0/missing --run automake-1.11
AWK = gawk
CATALOGS = 
CATOBJEXT = .gmo
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DATADIRNAME = share
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DISABLE_DEPRECATED = 
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = 
FGREP = /usr/bin/grep -F
GDATA_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/libsoup-2.4  
GDATA_LIBS = -pthread -lxml2 -lgthread-2.0 -lrt -lsoup-2.4 -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0  
GDATA_LT_VERSION = 6:0:0
GDATA_VERSION_MAJOR = 0
GDATA_VERSION_MICRO = 0
GDATA_VERSION_MINOR = 5
GETTEXT_PACKAGE = gdata
GLIB_GENMARSHAL = /usr/bin/glib-genmarshal
GLIB_MKENUMS = /usr/bin/glib-mkenums
GMOFILES = 
GMSGFMT = /usr/bin/msgfmt
GNOME_CFLAGS = -I/usr/include/libsoup-gnome-2.4 -I/usr/include/libsoup-2.4 -I/usr/include/libxml2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
GNOME_LIBS = -lsoup-gnome-2.4 -lsoup-2.4 -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0  
GREP = /usr/bin/grep
GTKDOC_CHECK = /usr/bin/gtkdoc-check
GTKDOC_MKPDF = 
GTKDOC_REBASE = /usr/bin/gtkdoc-rebase
HTML_DIR = ${datadir}/gtk-doc/html
INSTALL = /usr/bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INSTOBJEXT = .mo
INTLLIBS = 
INTLTOOL_EXTRACT = /usr/bin/intltool-extract
INTLTOOL_MERGE = /usr/bin/intltool-merge
INTLTOOL_PERL = /usr/local/bin/perl
INTLTOOL_UPDATE = /usr/bin/intltool-update
LD = /usr/i486-slackware-linux/bin/ld
LDFLAGS = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /GNOME-2.28/libgdata-0.5.0/missing --run makeinfo
MKDIR_P = /usr/bin/mkdir -p
MKINSTALLDIRS = ./mkinstalldirs
MSGFMT = /usr/bin/msgfmt
MSGFMT_OPTS = -c
MSGMERGE = /usr/bin/msgmerge
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = libgdata
PACKAGE_BUGREPORT = 
PACKAGE_NAME = libgdata
PACKAGE_STRING = libgdata 0.5.0
PACKAGE_TARNAME = libgdata
PACKAGE_VERSION = 0.5.0
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
POFILES = 
POSUB = po
PO_IN_DATADIR_FALSE = 
PO_IN_DATADIR_TRUE = 
RANLIB = ranlib
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
USE_NLS = yes
VERSION = 0.5.0
WARN_CFLAGS = -Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wno-sign-compare 
WARN_CXXFLAGS = -g -O2 -Wall -Wno-unused 
XGETTEXT = /usr/bin/xgettext
abs_builddir = /GNOME-2.28/libgdata-0.5.0/docs/reference
abs_srcdir = /GNOME-2.28/libgdata-0.5.0/docs/reference
abs_top_builddir = /GNOME-2.28/libgdata-0.5.0
abs_top_srcdir = /GNOME-2.28/libgdata-0.5.0
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i486-slackware-linux-gnu
build_alias = i486-slackware-linux
build_cpu = i486
build_os = linux-gnu
build_vendor = slackware
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = i486-slackware-linux-gnu
host_alias = 
host_cpu = i486
host_os = linux-gnu
host_vendor = slackware
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = /usr/info
install_sh = ${SHELL} /GNOME-2.28/libgdata-0.5.0/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
lt_ECHO = echo
mandir = /usr/man
mkdir_p = /usr/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target_alias = 
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..

# We require automake 1.6 at least.
AUTOMAKE_OPTIONS = 1.6

# This is a blank Makefile.am for using gtk-doc.
# Copy this to your project's API docs directory and modify the variables to
# suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples
# of using the various options.

# The name of the module, e.g. 'glib'.
DOC_MODULE = gdata

# The top-level SGML file. You can change this if you want to.
DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.xml

# The directory containing the source code. Relative to $(srcdir).
# gtk-doc will search all .c & .h files beneath here for inline comments
# documenting the functions and macros.
# e.g. DOC_SOURCE_DIR=../../../gtk
DOC_SOURCE_DIR = ../../gdata

# Extra options to pass to gtkdoc-scangobj. Not normally needed.
SCANGOBJ_OPTIONS = 

# Extra options to supply to gtkdoc-scan.
# e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED" 
SCAN_OPTIONS = --rebuild-types

# Extra options to supply to gtkdoc-mkdb.
# e.g. MKDB_OPTIONS=--sgml-mode --output-format=xml
MKDB_OPTIONS = --sgml-mode --output-format=xml --name-space=gdata

# Extra options to supply to gtkdoc-mktmpl
# e.g. MKTMPL_OPTIONS=--only-section-tmpl
MKTMPL_OPTIONS = 

# Extra options to supply to gtkdoc-fixref. Not normally needed.
# e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html
FIXXREF_OPTIONS = 

# Add the builddir to the HTML path so that version.xml is found
MKHTML_OPTIONS = --path="$(abs_builddir)"

# Used for dependencies. The docs will be rebuilt if any of these change.
# e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h
# e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c
HFILE_GLOB = $(top_srcdir)/gdata/*.h $(top_srcdir)/gdata/services/*/*.h
CFILE_GLOB = $(top_srcdir)/gdata/*.c $(top_srcdir)/gdata/services/*/*.c

# Header files to ignore when scanning.
# e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h
IGNORE_HFILES = \
	common.h		\
	gdata-private.h		\
	gdata-parser.h		\
	gdata-marshal.h		\
	gdata-enums.h		\
	gdata-media-enums.h	\
	gdata-media-group.h	\
	gdata-youtube-group.h	\
	gdata-youtube-control.h	\
	gdata-picasaweb-enums.h	\
	gdata-exif-tags.h	\
	gdata-georss-where.h	\
	gdata-buffer.h


# Images to copy into HTML directory.
# e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png
HTML_IMAGES = \
	structure.png	\
	data-flow.png


# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE).
# e.g. content_files=running.sgml building.sgml changes-2.0.sgml
content_files = version.xml gdata-overview.xml

# SGML files where gtk-doc abbrevations (#GtkWidget) are expanded
# These files must be listed here *and* in content_files
# e.g. expand_content_files=running.sgml
expand_content_files = 

# CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library.
# Only needed if you are using gtkdoc-scangobj to dynamically query widget
# signals and properties.
# e.g. INCLUDES=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS)
# e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib)
INCLUDES = -I$(top_srcdir) -I$(top_builddir) $(GDATA_CFLAGS)
GTKDOC_LIBS = $(top_builddir)/gdata/libgdata.la
#GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
#GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
#GTKDOC_RUN = 
GTKDOC_RUN = $(LIBTOOL) --mode=execute

# We set GPATH here; this gives us semantics for GNU make
# which are more like other make's VPATH, when it comes to
# whether a source that is a target of one rule is then
# searched for in VPATH/GPATH.
#
GPATH = $(srcdir)
TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)

# Other files to distribute
# e.g. EXTRA_DIST += version.xml.in
EXTRA_DIST = $(content_files) $(HTML_IMAGES) $(DOC_MAIN_SGML_FILE) \
	$(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt \
	version.xml.in structure.dia
DOC_STAMPS = scan-build.stamp tmpl-build.stamp sgml-build.stamp html-build.stamp \
	pdf-build.stamp \
	$(srcdir)/tmpl.stamp $(srcdir)/sgml.stamp $(srcdir)/html.stamp \
	$(srcdir)/pdf.stamp


# This includes the standard gtk-doc make rules, copied by gtkdocize.

# This should be in gtk-doc.make, since we are calling gtkdoc-scan with
# --rebuild-types
SCANOBJ_FILES = $(DOC_MODULE).args $(DOC_MODULE).hierarchy \
	$(DOC_MODULE).interfaces $(DOC_MODULE).prerequisites \
	$(DOC_MODULE).signals $(DOC_MODULE).types
REPORT_FILES = \
	$(DOC_MODULE)-undocumented.txt \
	$(DOC_MODULE)-undeclared.txt \
	$(DOC_MODULE)-unused.txt

CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS)
##HTML_BUILD_STAMP = 
#HTML_BUILD_STAMP = html-build.stamp
#PDF_BUILD_STAMP = 
##PDF_BUILD_STAMP = pdf-build.stamp
GITIGNOREFILES = tmpl/
#TESTS_ENVIRONMENT = cd $(srcdir) && 
#TESTS = $(GTKDOC_CHECK)
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/reference/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu docs/reference/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


check-TESTS: $(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
	srcdir=$(srcdir); export srcdir; \
	list=' $(TESTS) '; \
	$(am__tty_colors); \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xpass=`expr $$xpass + 1`; \
		failed=`expr $$failed + 1`; \
		col=$$red; res=XPASS; \
	      ;; \
	      *) \
		col=$$grn; res=PASS; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xfail=`expr $$xfail + 1`; \
		col=$$lgn; res=XFAIL; \
	      ;; \
	      *) \
		failed=`expr $$failed + 1`; \
		col=$$red; res=FAIL; \
	      ;; \
	      esac; \
	    else \
	      skip=`expr $$skip + 1`; \
	      col=$$blu; res=SKIP; \
	    fi; \
	    echo "$${col}$$res$${std}: $$tst"; \
	  done; \
	  if test "$$all" -eq 1; then \
	    tests="test"; \
	    All=""; \
	  else \
	    tests="tests"; \
	    All="All "; \
	  fi; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="$$All$$all $$tests passed"; \
	    else \
	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all $$tests failed"; \
	    else \
	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
	    fi; \
	  fi; \
	  dashes="$$banner"; \
	  skipped=""; \
	  if test "$$skip" -ne 0; then \
	    if test "$$skip" -eq 1; then \
	      skipped="($$skip test was not run)"; \
	    else \
	      skipped="($$skip tests were not run)"; \
	    fi; \
	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$skipped"; \
	  fi; \
	  report=""; \
	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
	    report="Please report to $(PACKAGE_BUGREPORT)"; \
	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$report"; \
	  fi; \
	  dashes=`echo "$$dashes" | sed s/./=/g`; \
	  if test "$$failed" -eq 0; then \
	    echo "$$grn$$dashes"; \
	  else \
	    echo "$$red$$dashes"; \
	  fi; \
	  echo "$$banner"; \
	  test -z "$$skipped" || echo "$$skipped"; \
	  test -z "$$report" || echo "$$report"; \
	  echo "$$dashes$$std"; \
	  test "$$failed" -eq 0; \
	else :; fi

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile all-local
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-local

.MAKE: check-am install-am install-strip

.PHONY: all all-am all-local check check-TESTS check-am clean \
	clean-generic clean-libtool clean-local dist-hook distclean \
	distclean-generic distclean-libtool distclean-local distdir \
	dvi dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-local install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-local


#all-local: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
all-local:

docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)

$(REPORT_FILES): sgml-build.stamp

#### scan ####

scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
	@echo 'gtk-doc: Scanning header files'
	@-chmod -R u+w $(srcdir)
	@cd $(srcdir) && \
	  gtkdoc-scan --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --ignore-headers="$(IGNORE_HFILES)" $(SCAN_OPTIONS) $(EXTRA_HFILES)
	@if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \
	    CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \
	else \
	    cd $(srcdir) ; \
	    for i in $(SCANOBJ_FILES) ; do \
               test -f $$i || touch $$i ; \
	    done \
	fi
	@touch scan-build.stamp

$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
	@true

#### templates ####

tmpl-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt
	@echo 'gtk-doc: Rebuilding template files'
	@-chmod -R u+w $(srcdir)
	@cd $(srcdir) && gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS)
	@touch tmpl-build.stamp

tmpl.stamp: tmpl-build.stamp
	@true

$(srcdir)/tmpl/*.sgml:
	@true

#### xml ####

sgml-build.stamp: tmpl.stamp $(DOC_MODULE)-sections.txt $(srcdir)/tmpl/*.sgml $(expand_content_files)
	@echo 'gtk-doc: Building XML'
	@-chmod -R u+w $(srcdir)
	@cd $(srcdir) && \
	gtkdoc-mkdb --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $(MKDB_OPTIONS)
	@touch sgml-build.stamp

sgml.stamp: sgml-build.stamp
	@true

#### html ####

html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
	@echo 'gtk-doc: Building HTML'
	@-chmod -R u+w $(srcdir)
	@rm -rf $(srcdir)/html
	@mkdir $(srcdir)/html
	@mkhtml_options=""; \
	gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-path"; \
	if test "$(?)" = "0"; then \
	  mkhtml_options=--path="$(srcdir)"; \
	fi; \
	cd $(srcdir)/html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
	@test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html )
	@echo 'gtk-doc: Fixing cross-references'
	@cd $(srcdir) && gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
	@touch html-build.stamp

#### pdf ####

pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
	@echo 'gtk-doc: Building PDF'
	@-chmod -R u+w $(srcdir)
	@rm -rf $(srcdir)/$(DOC_MODULE).pdf
	@mkpdf_imgdirs=""; \
	if test "x$(HTML_IMAGES)" != "x"; then for img in "$(HTML_IMAGES)"; do mkpdf_imgdirs="$$mkpdf_imgdirs --imgdir=`dirname $$img`"; done; fi; \
	cd $(srcdir) && gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_imgdirs $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
	@touch pdf-build.stamp

##############

clean-local:
	rm -f *~ *.bak
	rm -rf .libs

distclean-local:
	cd $(srcdir) && \
	  rm -rf xml $(REPORT_FILES) $(DOC_MODULE).pdf \
	         $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt

maintainer-clean-local: clean
	cd $(srcdir) && rm -rf xml html

install-data-local:
	@installfiles=`echo $(srcdir)/html/*`; \
	if test "$$installfiles" = '$(srcdir)/html/*'; \
	then echo '-- Nothing to install' ; \
	else \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	  else \
	    installdir="$(DESTDIR)$(TARGET_DIR)"; \
	  fi; \
	  $(mkinstalldirs) $${installdir} ; \
	  for i in $$installfiles; do \
	    echo '-- Installing '$$i ; \
	    $(INSTALL_DATA) $$i $${installdir}; \
	  done; \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
	      $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
	    mv -f $${installdir}/$(DOC_MODULE).devhelp \
	      $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp; \
	  fi; \
	  $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
	fi

uninstall-local:
	@if test -n "$(DOC_MODULE_VERSION)"; then \
	  installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	else \
	  installdir="$(DESTDIR)$(TARGET_DIR)"; \
	fi; \
	rm -rf $${installdir}

#
# Require gtk-doc when making dist
#
#dist-check-gtkdoc:
dist-check-gtkdoc:
	@echo "*** gtk-doc must be installed and enabled in order to make dist"
	@false

dist-hook: dist-check-gtkdoc dist-hook-local
	mkdir $(distdir)/tmpl
	mkdir $(distdir)/html
	-cp $(srcdir)/tmpl/*.sgml $(distdir)/tmpl
	cp $(srcdir)/html/* $(distdir)/html
	-cp $(srcdir)/$(DOC_MODULE).pdf $(distdir)/
	-cp $(srcdir)/$(DOC_MODULE).types $(distdir)/
	-cp $(srcdir)/$(DOC_MODULE)-sections.txt $(distdir)/
	cd $(distdir) && rm -f $(DISTCLEANFILES)
	$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html

.PHONY : dist-hook-local docs

# This should also be dealt with elsewhere, but we can't call gtkdocize
# with --flavour=no-tmpl because of gnome-autogen.sh being out of our
# control. Grrr.
distclean-local:
	cd $(srcdir) && \
	  rm -rf xml tmpl $(REPORT_FILES) \
	         $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt

maintainer-clean-local: clean
	cd $(srcdir) && rm -rf xml tmpl html

-include $(top_srcdir)/git.mk

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
