# Makefile.in generated by automake 1.11 from Makefile.am.
# docs/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




pkgdatadir = $(datadir)/libgdamm
pkgincludedir = $(includedir)/libgdamm
pkglibdir = $(libdir)/libgdamm
pkglibexecdir = $(libexecdir)/libgdamm
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i486-slackware-linux-gnu
host_triplet = i486-slackware-linux-gnu
DIST_COMMON = $(dist_devhelp_DATA) $(dist_noinst_DATA) \
	$(dist_reference_DATA) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(top_srcdir)/build/doc-reference.am \
	$(top_srcdir)/libgda/libgdamm/filelist.am \
	$(top_srcdir)/libgda/src/filelist.am
subdir = docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/build/libtool.m4 \
	$(top_srcdir)/build/ltoptions.m4 \
	$(top_srcdir)/build/ltsugar.m4 \
	$(top_srcdir)/build/ltversion.m4 \
	$(top_srcdir)/build/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/build/config.h \
	$(top_builddir)/libgda/libgdammconfig.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(devhelpdir)" \
	"$(DESTDIR)$(referencedir)"
DATA = $(dist_devhelp_DATA) $(dist_noinst_DATA) $(dist_reference_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /src/libgdamm-3.99.17/build/missing --run aclocal-1.11
ACLOCAL_FLAGS = 
AMTAR = ${SHELL} /src/libgdamm-3.99.17/build/missing --run tar
AR = ar
AS = as
AUTOCONF = ${SHELL} /src/libgdamm-3.99.17/build/missing --run autoconf
AUTOHEADER = ${SHELL} /src/libgdamm-3.99.17/build/missing --run autoheader
AUTOMAKE = ${SHELL} /src/libgdamm-3.99.17/build/missing --run automake-1.11
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DOCINSTALL_FLAGS = -l 'libstdc++.tag@http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/' -l 'libsigc++-2.0.tag@file:///usr/share/doc/libsigc++-2.0/reference/html/' -l 'glibmm-2.4.tag@file:///usr/share/doc/glibmm-2.4/reference/html/'
DOT = /usr/bin/dot
DOXYGEN = /usr/bin/doxygen
DOXYGEN_TAGFILES = "/usr/share/mm-common/doctags/libstdc++.tag=http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen" "/usr/share/doc/libsigc++-2.0/reference/libsigc++-2.0.tag=http://library.gnome.org/devel/libsigc++/unstable" "/usr/share/doc/glibmm-2.4/reference/glibmm-2.4.tag=http://library.gnome.org/devel/glibmm/unstable"
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = 
FGREP = /usr/bin/grep -F
GMMPROC_DIR = /usr/lib/glibmm-2.4/proc
GREP = /usr/bin/grep
INSTALL = /usr/bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/i486-slackware-linux/bin/ld
LDFLAGS = 
LIBGDAMM_API_VERSION = 4.0
LIBGDAMM_CFLAGS = -pthread -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgda-4.0 -I/usr/include/libgda-4.0/libgda -I/usr/include/libxml2  
LIBGDAMM_LIBS = -pthread -lglibmm-2.4 -lsigc-2.0 -lgda-4.0 -lgobject-2.0 -lgthread-2.0 -lrt -lxml2 -lglib-2.0  
LIBGDAMM_MAJOR_VERSION = 3
LIBGDAMM_MICRO_VERSION = 17
LIBGDAMM_MINOR_VERSION = 99
LIBGDAMM_MODULES = glibmm-2.4 >= 2.12.8 libgda-4.0 >= 4.0.3
LIBGDAMM_MODULE_NAME = libgdamm-4.0
LIBGDAMM_SO_VERSION = 12:0:0
LIBGDAMM_VERSION = 3.99.17
LIBGDAMM_WXXFLAGS = -Wall
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /src/libgdamm-3.99.17/build/missing --run makeinfo
MKDIR_P = /usr/bin/mkdir -p
MMDOCTOOLDIR = /usr/share/glibmm-2.4/doctool
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = libgdamm
PACKAGE_BUGREPORT = http://bugzilla.gnome.org/enter_bug.cgi?product=libgdamm
PACKAGE_NAME = libgdamm
PACKAGE_STRING = libgdamm 3.99.17
PACKAGE_TARNAME = libgdamm
PACKAGE_VERSION = 3.99.17
PATH_SEPARATOR = :
PERL = /usr/local/bin/perl
PKG_CONFIG = /usr/bin/pkg-config
RANLIB = ranlib
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
VERSION = 3.99.17
XSLTPROC = /usr/bin/xsltproc
abs_builddir = /src/libgdamm-3.99.17/docs
abs_srcdir = /src/libgdamm-3.99.17/docs
abs_top_builddir = /src/libgdamm-3.99.17
abs_top_srcdir = /src/libgdamm-3.99.17
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=posix -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = i486-slackware-linux-gnu
build_alias = i486-slackware-linux
build_cpu = i486
build_os = linux-gnu
build_vendor = slackware
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = i486-slackware-linux-gnu
host_alias = 
host_cpu = i486
host_os = linux-gnu
host_vendor = slackware
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = /usr/info
install_sh = ${SHELL} /src/libgdamm-3.99.17/build/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
lt_ECHO = echo
mandir = /usr/man
mkdir_p = /usr/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
files_defs = \
	libgda.defs		\
	libgda_enums.defs	\
	libgda_methods.defs	\
	libgda_others.defs	\
	libgda_signals.defs	\
	libgda_docs.xml		\
	libgda_docs_override.xml

files_hg = \
	batch.hg		\
	blob.hg			\
	blobop.hg		\
	column.hg		\
	config.hg		\
	connection.hg		\
	connectionevent.hg	\
	dataaccesswrapper.hg	\
	datacomparator.hg	\
	datahandler.hg		\
	datamodel.hg		\
	datamodelarray.hg	\
	datamodelimport.hg	\
	datamodeliter.hg	\
	dataproxy.hg		\
	dataselect.hg		\
	handlerbin.hg		\
	handlerboolean.hg	\
	handlernumerical.hg	\
	handlerstring.hg	\
	handlertime.hg		\
	handlertype.hg		\
	holder.hg		\
	metastore.hg		\
	metastruct.hg		\
	quarklist.hg		\
	row.hg			\
	serveroperation.hg	\
	serverprovider.hg	\
	set.hg			\
	sqlparser.hg		\
	statement.hg		\
	transactionstatus.hg	\
	xatransaction.hg

files_built_cc = $(files_hg:.hg=.cc) wrap_init.cc
files_built_h = $(files_hg:.hg=.h)
files_built_ph = $(patsubst %.hg,private/%_p.h,$(files_hg))
files_extra_cc = init.cc throw_exception.cc value.cc
files_extra_h = init.h throw_exception.h value.h wrap_init.h
files_extra_ph = 
libgdamm_files_h = $(files_built_h) $(filter-out wrap_init.h,$(files_extra_h))
book_name = $(LIBGDAMM_MODULE_NAME)
doc_input = $(addprefix $(top_srcdir)/libgda/libgdamm/,$(libgdamm_files_h))

# Override the web location to use the old-style path with redundant
# directory components.
htmlrefpub = http://www.gtkmm.org/docs/$(book_name)/docs/reference/html/

# Names of the main output files.
doxytagfile = reference/$(book_name).tag
devhelpfile = reference/$(book_name).devhelp2

# Function: $(call vpath_listall,PATTERN ...)
# Get all filenames which match a PATTERN from the list.  Look for files
# relative to either the current directory or $(srcdir).  Strip $(srcdir)/
# again before returning and remove any duplicates.
vpath_srclist = $(patsubst $(srcdir)/%,%,$(wildcard $(addprefix $(srcdir)/,$(1))))
vpath_listall = $(sort $(wildcard $(1)) $(if $(srcdir:.=),$(vpath_srclist)))

# Installation directories.
libdocdir = $(datarootdir)/doc/$(book_name)
referencedir = $(libdocdir)/reference
htmlrefdir = $(referencedir)/html
devhelpdir = $(datadir)/devhelp/books/$(book_name)
dist_reference_DATA = $(doxytagfile)
dist_devhelp_DATA = $(devhelpfile)
dist_noinst_DATA = $(call vpath_listall,$(htmlref_patterns)) \
	reference/libgdamm_header.html_fragment \
	reference/libgdamm_footer.html_fragment
DISTCLEANFILES = reference/doxygen.log
MAINTAINERCLEANFILES = $(doxytagfile) $(devhelpfile) reference/html/*

# The generic bit of the doc-install.pl command line.
doc_install_cmd = $(doc_install) --verbose --mode=0644

# Turn $(datarootdir) into a URI to match MM_ARG_WITH_TAGFILE_DOC().
datarootdir_esc = $(subst $(subst ,, ),%20,$(subst \,/,$(datarootdir)))
docdir_base_uri = file:///$(patsubst /%,%,$(datarootdir_esc))/doc

# The command and options used to install the files from the HTML reference
# documentation.  The $(subst) magic translates external tag references from
# absolute to relative paths if the destination is on the local file system
# and installed under the same prefix as the package being built.
htmlref_relinst = $(subst @$(docdir_base_uri)/,@../../../,$(DOCINSTALL_FLAGS))
htmlref_install = $(doc_install_cmd) $(htmlref_relinst)

# Override the file installation program for dist_devhelp_DATA files.
# Note that this is not a documented feature as far as I'm aware, but
# Automake recognizes the override and does not try to assign its own
# default value.
dist_devhelpDATA_INSTALL = $(doc_install_cmd) --book-base='$(htmlrefdir:/=)' -T --

# Helper variables to replicate each pattern with a $(srcdir)/ prefix.
# Also add quoting to prevent the shell from expanding the patterns.
htmlref_patterns_dup = $(foreach file,$(htmlref_patterns),'$(file)' '$(srcdir)/$(file)')
htmlref_patterns_vpath = $(if $(srcdir:.=),$(htmlref_patterns_dup),$(htmlref_patterns:%='%'))

# Expand to a list of -name 'PATTERN' arguments for use with 'find'.
htmlref_find_patterns = $(patsubst %,-name '%' -o,$(notdir $(htmlref_patterns))) -false

# The parameters to the Doxygen-to-Devhelp XSLT script
dh_xsl_params = --stringparam book_title '$(book_title)' \
		--stringparam book_name '$(book_name)' \
		--stringparam book_base '$(htmlrefpub:/=)'

doc_dependencies = 

# Regenerate the documentation automatically only in maintainer mode.
#doc_dependencies = $(doc_input) $(srcdir)/reference/Doxyfile.in
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/libgda/src/filelist.am $(top_srcdir)/libgda/libgdamm/filelist.am $(top_srcdir)/build/doc-reference.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu docs/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-dist_devhelpDATA: $(dist_devhelp_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(devhelpdir)" || $(MKDIR_P) "$(DESTDIR)$(devhelpdir)"
	@list='$(dist_devhelp_DATA)'; test -n "$(devhelpdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(devhelpdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(devhelpdir)" || exit $$?; \
	done

uninstall-dist_devhelpDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_devhelp_DATA)'; test -n "$(devhelpdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(devhelpdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(devhelpdir)" && rm -f $$files
install-dist_referenceDATA: $(dist_reference_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(referencedir)" || $(MKDIR_P) "$(DESTDIR)$(referencedir)"
	@list='$(dist_reference_DATA)'; test -n "$(referencedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(referencedir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(referencedir)" || exit $$?; \
	done

uninstall-dist_referenceDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_reference_DATA)'; test -n "$(referencedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(referencedir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(referencedir)" && rm -f $$files
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(devhelpdir)" "$(DESTDIR)$(referencedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local install-dist_devhelpDATA \
	install-dist_referenceDATA

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_devhelpDATA uninstall-dist_referenceDATA \
	uninstall-local

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-local \
	install-dist_devhelpDATA install-dist_referenceDATA \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
	ps ps-am uninstall uninstall-am uninstall-dist_devhelpDATA \
	uninstall-dist_referenceDATA uninstall-local


# The base URL where the online documentation for C++ binding modules
# is located, including the trailing slash.
pubdocbase ?= http://www.gtkmm.org/docs/

# The URL of the module's online HTML reference documentation, which
# may or may not end in a trailing slash.
htmlrefpub ?= $(pubdocbase)$(book_name)/reference/html/

# The title of the generated Devhelp book.
book_title ?= $(PACKAGE_NAME) Reference Manual

# A list of wildcard patterns matching the files from the HTML directory
# generated by Doxygen which should be distributed and installed.
htmlref_patterns ?=		\
	reference/html/*.html	\
	reference/html/*.css	\
	reference/html/*.png	\
	reference/html/*.gif

# Locations of utilities shipped with glibmm.  Made overridable
# in case the installed utilities cannot be used for some reason.
doc_postprocess     ?= $(PERL) -- "$(MMDOCTOOLDIR)/doc-postprocess.pl"
doc_install         ?= $(PERL) -- "$(MMDOCTOOLDIR)/doc-install.pl"
tagfile_to_devhelp2 ?= "$(MMDOCTOOLDIR)/tagfile-to-devhelp2.xsl"

# Install the HTML reference documentation files with just one invocation
# of doc-install.pl to speed up the build process.  Make use of the --glob
# option, which tells it to perform filename globbing itself, like 'find'.
# This helps to avoid excessively long command lines, as some platforms
# have rather restrictive limits.
install-data-local: reference/html/index.html
	@$(NORMAL_INSTALL)
	$(MKDIR_P) '$(DESTDIR)$(htmlrefdir)'
	$(htmlref_install) -t '$(DESTDIR)$(htmlrefdir)' --glob -- $(htmlref_patterns_vpath)

# Delete files from the html installation directory.  Avoid recursive
# directory removal, and apply the same wildcard pattern as was used to
# select files for installation.
uninstall-local:
	@$(NORMAL_UNINSTALL)
	(cd '$(DESTDIR)$(htmlrefdir)' 2>/dev/null || exit 0; \
	 find . -type f \( $(htmlref_find_patterns) \) -exec rm -f '{}' '+')
	-test ! -r '$(DESTDIR)$(htmlrefdir)' || rmdir '$(DESTDIR)$(htmlrefdir)'

# Regenerate the Doxygen configuration file automatically.
reference/Doxyfile: $(srcdir)/reference/Doxyfile.in $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

# Make sure that the documentation will always have been generated before
# executing the commands of a rule that depends on files in reference/html/.
reference/html/%: | $(doxytagfile)

# Run Doxygen to build the reference documentation. The generated tag file
# also functions as time stamp target for the documentation as a whole.
$(doxytagfile): $(doc_dependencies) | reference/Doxyfile
	-rm -f '$@'
	-rm -fr reference/html
	(echo '@INCLUDE =' reference/Doxyfile && echo 'INPUT =' $(doc_input)) | $(DOXYGEN) -
	$(doc_postprocess) 'reference/html/*.html'

# Run XSL transformation to generate a Devhelp book from a Doxygen tag file.
%.devhelp2: %.tag
	$(XSLTPROC) $(dh_xsl_params) -o $@ $(tagfile_to_devhelp2) $<

# Instruct GNU make to delete the targets of a rule after it failed, in
# order to avoid the complication of handling that situation manually.
.DELETE_ON_ERROR:

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
