# Makefile.in generated by automake 1.11 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation
#
# Author: Nikos Mavrogiannopoulos
#
# This file is part of GNUTLS.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This file is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this file; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.



pkgdatadir = $(datadir)/gnutls
pkgincludedir = $(includedir)/gnutls
pkglibdir = $(libdir)/gnutls
pkglibexecdir = $(libexecdir)/gnutls
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i486-slackware-linux-gnu
host_triplet = i486-slackware-linux-gnu
#am__append_1 = reference
noinst_PROGRAMS = errcodes$(EXEEXT) printlist$(EXEEXT)
subdir = doc
DIST_COMMON = $(gnutls_TEXINFOS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/stamp-vti \
	$(srcdir)/version.texi TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/libextra/m4/hooks.m4 \
	$(top_srcdir)/lib/m4/hooks.m4 $(top_srcdir)/lib/gl/m4/po.m4 \
	$(top_srcdir)/gl/m4/00gnulib.m4 $(top_srcdir)/gl/m4/alloca.m4 \
	$(top_srcdir)/gl/m4/arpa_inet_h.m4 \
	$(top_srcdir)/gl/m4/autobuild.m4 $(top_srcdir)/gl/m4/close.m4 \
	$(top_srcdir)/gl/m4/errno_h.m4 $(top_srcdir)/gl/m4/error.m4 \
	$(top_srcdir)/gl/m4/extensions.m4 \
	$(top_srcdir)/gl/m4/fclose.m4 $(top_srcdir)/gl/m4/float_h.m4 \
	$(top_srcdir)/gl/m4/fseeko.m4 \
	$(top_srcdir)/gl/m4/getaddrinfo.m4 \
	$(top_srcdir)/gl/m4/getdelim.m4 $(top_srcdir)/gl/m4/getline.m4 \
	$(top_srcdir)/gl/m4/getpagesize.m4 \
	$(top_srcdir)/gl/m4/getpass.m4 \
	$(top_srcdir)/gl/m4/gettimeofday.m4 \
	$(top_srcdir)/gl/m4/gnulib-common.m4 \
	$(top_srcdir)/gl/m4/gnulib-comp.m4 \
	$(top_srcdir)/gl/m4/hostent.m4 \
	$(top_srcdir)/gl/m4/include_next.m4 \
	$(top_srcdir)/gl/m4/inet_ntop.m4 \
	$(top_srcdir)/gl/m4/inet_pton.m4 \
	$(top_srcdir)/gl/m4/intmax_t.m4 \
	$(top_srcdir)/gl/m4/inttypes_h.m4 \
	$(top_srcdir)/gl/m4/lib-ld.m4 $(top_srcdir)/gl/m4/lib-link.m4 \
	$(top_srcdir)/gl/m4/lib-prefix.m4 \
	$(top_srcdir)/gl/m4/longlong.m4 $(top_srcdir)/gl/m4/lseek.m4 \
	$(top_srcdir)/gl/m4/malloc.m4 \
	$(top_srcdir)/gl/m4/manywarnings.m4 \
	$(top_srcdir)/gl/m4/memchr.m4 $(top_srcdir)/gl/m4/minmax.m4 \
	$(top_srcdir)/gl/m4/mmap-anon.m4 \
	$(top_srcdir)/gl/m4/multiarch.m4 \
	$(top_srcdir)/gl/m4/netdb_h.m4 \
	$(top_srcdir)/gl/m4/netinet_in_h.m4 \
	$(top_srcdir)/gl/m4/onceonly_2_57.m4 \
	$(top_srcdir)/gl/m4/perror.m4 \
	$(top_srcdir)/gl/m4/pmccabe2html.m4 \
	$(top_srcdir)/gl/m4/printf.m4 $(top_srcdir)/gl/m4/read-file.m4 \
	$(top_srcdir)/gl/m4/readline.m4 $(top_srcdir)/gl/m4/realloc.m4 \
	$(top_srcdir)/gl/m4/select.m4 $(top_srcdir)/gl/m4/servent.m4 \
	$(top_srcdir)/gl/m4/size_max.m4 \
	$(top_srcdir)/gl/m4/snprintf.m4 $(top_srcdir)/gl/m4/sockets.m4 \
	$(top_srcdir)/gl/m4/socklen.m4 $(top_srcdir)/gl/m4/sockpfaf.m4 \
	$(top_srcdir)/gl/m4/stdarg.m4 $(top_srcdir)/gl/m4/stdbool.m4 \
	$(top_srcdir)/gl/m4/stddef_h.m4 $(top_srcdir)/gl/m4/stdint.m4 \
	$(top_srcdir)/gl/m4/stdint_h.m4 $(top_srcdir)/gl/m4/stdio_h.m4 \
	$(top_srcdir)/gl/m4/stdlib_h.m4 \
	$(top_srcdir)/gl/m4/strerror.m4 \
	$(top_srcdir)/gl/m4/string_h.m4 \
	$(top_srcdir)/gl/m4/sys_ioctl_h.m4 \
	$(top_srcdir)/gl/m4/sys_select_h.m4 \
	$(top_srcdir)/gl/m4/sys_socket_h.m4 \
	$(top_srcdir)/gl/m4/sys_stat_h.m4 \
	$(top_srcdir)/gl/m4/sys_time_h.m4 \
	$(top_srcdir)/gl/m4/ungetc.m4 $(top_srcdir)/gl/m4/unistd_h.m4 \
	$(top_srcdir)/gl/m4/vasnprintf.m4 \
	$(top_srcdir)/gl/m4/version-etc.m4 \
	$(top_srcdir)/gl/m4/warnings.m4 $(top_srcdir)/gl/m4/wchar.m4 \
	$(top_srcdir)/gl/m4/wchar_t.m4 $(top_srcdir)/gl/m4/wint_t.m4 \
	$(top_srcdir)/gl/m4/xsize.m4 $(top_srcdir)/m4/gtk-doc.m4 \
	$(top_srcdir)/m4/guile.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/valgrind.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
PROGRAMS = $(noinst_PROGRAMS)
am_errcodes_OBJECTS = errcodes.$(OBJEXT)
errcodes_OBJECTS = $(am_errcodes_OBJECTS)
errcodes_DEPENDENCIES = ../lib/libgnutls.la ../gl/libgnu.la
am_printlist_OBJECTS = printlist.$(OBJEXT)
printlist_OBJECTS = $(am_printlist_OBJECTS)
printlist_DEPENDENCIES = ../lib/libgnutls.la ../gl/libgnu.la
DEFAULT_INCLUDES = -I. -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(errcodes_SOURCES) $(printlist_SOURCES)
DIST_SOURCES = $(errcodes_SOURCES) $(printlist_SOURCES)
INFO_DEPS = $(srcdir)/gnutls.info
TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
DVIS = gnutls.dvi
PDFS = gnutls.pdf
PSS = gnutls.ps
HTMLS = gnutls.html
TEXINFOS = gnutls.texi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(imagesdir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
DATA = $(images_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = examples cyclo scripts manpages credentials reference
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} /GNOME1/gnutls-2.9.3/build-aux/missing --run aclocal-1.11
ALLOCA = 
ALLOCA_H = alloca.h
AMTAR = ${SHELL} /GNOME1/gnutls-2.9.3/build-aux/missing --run tar
APPLE_UNIVERSAL_BUILD = 0
AR = ar
ARPA_INET_H = arpa/inet.h
AS = as
AUTOCONF = ${SHELL} /GNOME1/gnutls-2.9.3/build-aux/missing --run autoconf
AUTOHEADER = ${SHELL} /GNOME1/gnutls-2.9.3/build-aux/missing --run autoheader
AUTOMAKE = ${SHELL} /GNOME1/gnutls-2.9.3/build-aux/missing --run automake-1.11
AWK = gawk
BITSIZEOF_PTRDIFF_T = 
BITSIZEOF_SIG_ATOMIC_T = 
BITSIZEOF_SIZE_T = 
BITSIZEOF_WCHAR_T = 
BITSIZEOF_WINT_T = 
CC = gcc -std=gnu99
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DLL_VERSION = 26
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EMULTIHOP_HIDDEN = 
EMULTIHOP_VALUE = 
ENOLINK_HIDDEN = 
ENOLINK_VALUE = 
EOVERFLOW_HIDDEN = 
EOVERFLOW_VALUE = 
ERRNO_H = 
EXEEXT = 
FGREP = /usr/bin/grep -F
FLOAT_H = 
GAA = /usr/bin/gaa
GETADDRINFO_LIB = 
GNULIB_ACCEPT = 1
GNULIB_ATOLL = 0
GNULIB_BIND = 1
GNULIB_BTOWC = 0
GNULIB_CALLOC_POSIX = 0
GNULIB_CHOWN = 0
GNULIB_CLOSE = 1
GNULIB_CONNECT = 1
GNULIB_DPRINTF = 0
GNULIB_DUP2 = 0
GNULIB_ENVIRON = 0
GNULIB_EUIDACCESS = 0
GNULIB_FCHDIR = 0
GNULIB_FCLOSE = 1
GNULIB_FFLUSH = 0
GNULIB_FOPEN = 0
GNULIB_FPRINTF = 1
GNULIB_FPRINTF_POSIX = 0
GNULIB_FPURGE = 0
GNULIB_FPUTC = 1
GNULIB_FPUTS = 1
GNULIB_FREOPEN = 0
GNULIB_FSEEK = 0
GNULIB_FSEEKO = 1
GNULIB_FSYNC = 0
GNULIB_FTELL = 0
GNULIB_FTELLO = 0
GNULIB_FTRUNCATE = 0
GNULIB_FWRITE = 1
GNULIB_GETADDRINFO = 1
GNULIB_GETCWD = 0
GNULIB_GETDELIM = 1
GNULIB_GETDOMAINNAME = 0
GNULIB_GETDTABLESIZE = 0
GNULIB_GETHOSTNAME = 0
GNULIB_GETLINE = 1
GNULIB_GETLOADAVG = 0
GNULIB_GETLOGIN_R = 0
GNULIB_GETPAGESIZE = 1
GNULIB_GETPEERNAME = 0
GNULIB_GETSOCKNAME = 0
GNULIB_GETSOCKOPT = 0
GNULIB_GETSUBOPT = 0
GNULIB_GETUSERSHELL = 0
GNULIB_INET_NTOP = 1
GNULIB_INET_PTON = 1
GNULIB_IOCTL = 1
GNULIB_LCHMOD = 0
GNULIB_LCHOWN = 0
GNULIB_LINK = 0
GNULIB_LISTEN = 1
GNULIB_LSEEK = 1
GNULIB_LSTAT = 0
GNULIB_MALLOC_POSIX = 0
GNULIB_MBRLEN = 0
GNULIB_MBRTOWC = 0
GNULIB_MBSCASECMP = 0
GNULIB_MBSCASESTR = 0
GNULIB_MBSCHR = 0
GNULIB_MBSCSPN = 0
GNULIB_MBSINIT = 0
GNULIB_MBSLEN = 0
GNULIB_MBSNCASECMP = 0
GNULIB_MBSNLEN = 0
GNULIB_MBSNRTOWCS = 0
GNULIB_MBSPBRK = 0
GNULIB_MBSPCASECMP = 0
GNULIB_MBSRCHR = 0
GNULIB_MBSRTOWCS = 0
GNULIB_MBSSEP = 0
GNULIB_MBSSPN = 0
GNULIB_MBSSTR = 0
GNULIB_MBSTOK_R = 0
GNULIB_MEMCHR = 1
GNULIB_MEMMEM = 0
GNULIB_MEMPCPY = 0
GNULIB_MEMRCHR = 0
GNULIB_MKDTEMP = 0
GNULIB_MKSTEMP = 0
GNULIB_OBSTACK_PRINTF = 0
GNULIB_OBSTACK_PRINTF_POSIX = 0
GNULIB_PERROR = 1
GNULIB_PRINTF = 1
GNULIB_PRINTF_POSIX = 0
GNULIB_PUTC = 1
GNULIB_PUTCHAR = 1
GNULIB_PUTENV = 0
GNULIB_PUTS = 1
GNULIB_RANDOM_R = 0
GNULIB_RAWMEMCHR = 0
GNULIB_READLINK = 0
GNULIB_REALLOC_POSIX = 1
GNULIB_RECV = 1
GNULIB_RECVFROM = 0
GNULIB_RPMATCH = 0
GNULIB_SELECT = 1
GNULIB_SEND = 1
GNULIB_SENDTO = 0
GNULIB_SETENV = 0
GNULIB_SETSOCKOPT = 1
GNULIB_SHUTDOWN = 1
GNULIB_SLEEP = 0
GNULIB_SNPRINTF = 1
GNULIB_SOCKET = 1
GNULIB_SPRINTF_POSIX = 0
GNULIB_STDIO_H_SIGPIPE = 0
GNULIB_STPCPY = 0
GNULIB_STPNCPY = 0
GNULIB_STRCASESTR = 0
GNULIB_STRCHRNUL = 0
GNULIB_STRDUP = 0
GNULIB_STRERROR = 1
GNULIB_STRNDUP = 0
GNULIB_STRNLEN = 0
GNULIB_STRPBRK = 0
GNULIB_STRSEP = 0
GNULIB_STRSIGNAL = 0
GNULIB_STRSTR = 0
GNULIB_STRTOD = 0
GNULIB_STRTOK_R = 0
GNULIB_STRTOLL = 0
GNULIB_STRTOULL = 0
GNULIB_STRVERSCMP = 0
GNULIB_UNISTD_H_GETOPT = 0
GNULIB_UNISTD_H_SIGPIPE = 0
GNULIB_UNSETENV = 0
GNULIB_VASPRINTF = 0
GNULIB_VDPRINTF = 0
GNULIB_VFPRINTF = 1
GNULIB_VFPRINTF_POSIX = 0
GNULIB_VPRINTF = 1
GNULIB_VPRINTF_POSIX = 0
GNULIB_VSNPRINTF = 0
GNULIB_VSPRINTF_POSIX = 0
GNULIB_WCRTOMB = 0
GNULIB_WCSNRTOMBS = 0
GNULIB_WCSRTOMBS = 0
GNULIB_WCTOB = 0
GNULIB_WCWIDTH = 0
GNULIB_WRITE = 0
GREP = /usr/bin/grep
GTKDOC_CHECK = /usr/bin/gtkdoc-check
GTKDOC_MKPDF = 
GTKDOC_REBASE = /usr/bin/gtkdoc-rebase
GUILE = /usr/bin/guile
GUILE_CFLAGS =   -pthread
GUILE_CONFIG = /usr/bin/guile-config
GUILE_LDFLAGS =  -pthread -lguile -lltdl  -lgmp -lcrypt -lm -lltdl
GUILE_SITE = $(datadir)/guile/site
GUILE_TOOLS = /usr/bin/guile-tools
HAVE_ARPA_INET_H = 1
HAVE_ATOLL = 1
HAVE_BTOWC = 1
HAVE_CALLOC_POSIX = 1
HAVE_DECL_ENVIRON = 1
HAVE_DECL_FPURGE = 1
HAVE_DECL_FREEADDRINFO = 1
HAVE_DECL_GAI_STRERROR = 1
HAVE_DECL_GETADDRINFO = 1
HAVE_DECL_GETDELIM = 1
HAVE_DECL_GETLINE = 1
HAVE_DECL_GETLOADAVG = 1
HAVE_DECL_GETLOGIN_R = 1
HAVE_DECL_GETNAMEINFO = 1
HAVE_DECL_INET_NTOP = 1
HAVE_DECL_INET_PTON = 1
HAVE_DECL_MEMMEM = 1
HAVE_DECL_MEMRCHR = 1
HAVE_DECL_OBSTACK_PRINTF = 1
HAVE_DECL_SNPRINTF = 1
HAVE_DECL_STRDUP = 1
HAVE_DECL_STRERROR = 1
HAVE_DECL_STRNDUP = 1
HAVE_DECL_STRNLEN = 1
HAVE_DECL_STRSIGNAL = 1
HAVE_DECL_STRTOK_R = 1
HAVE_DECL_VSNPRINTF = 1
HAVE_DECL_WCTOB = 1
HAVE_DECL_WCWIDTH = 1
HAVE_DPRINTF = 1
HAVE_DUP2 = 1
HAVE_EUIDACCESS = 1
HAVE_FSEEKO = 1
HAVE_FSYNC = 1
HAVE_FTELLO = 1
HAVE_FTRUNCATE = 1
HAVE_GETDOMAINNAME = 1
HAVE_GETDTABLESIZE = 1
HAVE_GETHOSTNAME = 1
HAVE_GETPAGESIZE = 1
HAVE_GETSUBOPT = 1
HAVE_GETUSERSHELL = 1
HAVE_INTTYPES_H = 1
HAVE_LCHMOD = 1
HAVE_LIBGCRYPT = yes
HAVE_LIBTASN1 = yes
HAVE_LINK = 1
HAVE_LONG_LONG_INT = 1
HAVE_LSTAT = 1
HAVE_MALLOC_POSIX = 1
HAVE_MBRLEN = 1
HAVE_MBRTOWC = 1
HAVE_MBSINIT = 1
HAVE_MBSNRTOWCS = 1
HAVE_MBSRTOWCS = 1
HAVE_MEMPCPY = 1
HAVE_MKDTEMP = 1
HAVE_NETDB_H = 1
HAVE_NETINET_IN_H = 
HAVE_OS_H = 0
HAVE_RANDOM_H = 0
HAVE_RANDOM_R = 1
HAVE_RAWMEMCHR = 1
HAVE_READLINK = 1
HAVE_REALLOC_POSIX = 1
HAVE_RPMATCH = 1
HAVE_SA_FAMILY_T = 1
HAVE_SETENV = 1
HAVE_SIGNED_SIG_ATOMIC_T = 
HAVE_SIGNED_WCHAR_T = 
HAVE_SIGNED_WINT_T = 
HAVE_SLEEP = 1
HAVE_STDINT_H = 1
HAVE_STPCPY = 1
HAVE_STPNCPY = 1
HAVE_STRCASESTR = 1
HAVE_STRCHRNUL = 1
HAVE_STRNDUP = 1
HAVE_STRPBRK = 1
HAVE_STRSEP = 1
HAVE_STRTOD = 1
HAVE_STRTOLL = 1
HAVE_STRTOULL = 1
HAVE_STRUCT_ADDRINFO = 1
HAVE_STRUCT_RANDOM_DATA = 1
HAVE_STRUCT_SOCKADDR_STORAGE = 1
HAVE_STRUCT_TIMEVAL = 1
HAVE_STRVERSCMP = 1
HAVE_SYS_BITYPES_H = 
HAVE_SYS_INTTYPES_H = 
HAVE_SYS_IOCTL_H = 1
HAVE_SYS_LOADAVG_H = 0
HAVE_SYS_PARAM_H = 0
HAVE_SYS_SELECT_H = 
HAVE_SYS_SOCKET_H = 1
HAVE_SYS_TIME_H = 1
HAVE_SYS_TYPES_H = 1
HAVE_UNISTD_H = 1
HAVE_UNSETENV = 1
HAVE_UNSIGNED_LONG_LONG_INT = 1
HAVE_VASPRINTF = 1
HAVE_VDPRINTF = 1
HAVE_WCHAR_H = 1
HAVE_WCHAR_T = 1
HAVE_WCRTOMB = 1
HAVE_WCSNRTOMBS = 1
HAVE_WCSRTOMBS = 1
HAVE_WINSOCK2_H = 0
HAVE_WINT_T = 1
HAVE_WS2TCPIP_H = 0
HAVE__BOOL = 1
HOSTENT_LIB = 
HTML_DIR = ${datadir}/gtk-doc/html
INCLUDE_NEXT = include_next
INCLUDE_NEXT_AS_FIRST_DIRECTIVE = include_next
INSTALL = /usr/bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/i486-slackware-linux/bin/ld
LDFLAGS = 
LIBGCRYPT = /usr/lib/libgcrypt.so /usr/lib/libgpg-error.so
LIBGCRYPT_PREFIX = /usr
LIBINTL = 
LIBOBJS = 
LIBREADLINE = /usr/lib/libreadline.so -lncurses
LIBS = 
LIBSOCKET = 
LIBTASN1 = /usr/lib/libtasn1.so
LIBTASN1_PREFIX = /usr
LIBTESTS_LIBDEPS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTALLOCA = 
LTLIBGCRYPT = -L/usr/lib -lgcrypt -L/usr/lib -lgpg-error
LTLIBINTL = 
LTLIBOBJS = 
LTLIBREADLINE = -L/usr/lib -lreadline -lncurses
LTLIBTASN1 = -L/usr/lib -ltasn1
LT_AGE = 15
LT_CURRENT = 41
LT_REVISION = 3
LZO_LIBS = 
MAKEINFO = ${SHELL} /GNOME1/gnutls-2.9.3/build-aux/missing --run makeinfo
MKDIR_P = /usr/bin/mkdir -p
NETDB_H = 
NETINET_IN_H = 
NEXT_ARPA_INET_H = <arpa/inet.h>
NEXT_AS_FIRST_DIRECTIVE_ARPA_INET_H = <arpa/inet.h>
NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = 
NEXT_AS_FIRST_DIRECTIVE_FLOAT_H = 
NEXT_AS_FIRST_DIRECTIVE_NETDB_H = <netdb.h>
NEXT_AS_FIRST_DIRECTIVE_NETINET_IN_H = 
NEXT_AS_FIRST_DIRECTIVE_STDARG_H = 
NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = 
NEXT_AS_FIRST_DIRECTIVE_STDINT_H = <stdint.h>
NEXT_AS_FIRST_DIRECTIVE_STDIO_H = <stdio.h>
NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = <stdlib.h>
NEXT_AS_FIRST_DIRECTIVE_STRING_H = <string.h>
NEXT_AS_FIRST_DIRECTIVE_SYS_IOCTL_H = <sys/ioctl.h>
NEXT_AS_FIRST_DIRECTIVE_SYS_SELECT_H = 
NEXT_AS_FIRST_DIRECTIVE_SYS_SOCKET_H = <sys/socket.h>
NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H = <sys/stat.h>
NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H = <sys/time.h>
NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = <unistd.h>
NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = <wchar.h>
NEXT_ERRNO_H = 
NEXT_FLOAT_H = 
NEXT_NETDB_H = <netdb.h>
NEXT_NETINET_IN_H = 
NEXT_STDARG_H = <stdarg.h>
NEXT_STDDEF_H = 
NEXT_STDINT_H = <stdint.h>
NEXT_STDIO_H = <stdio.h>
NEXT_STDLIB_H = <stdlib.h>
NEXT_STRING_H = <string.h>
NEXT_SYS_IOCTL_H = <sys/ioctl.h>
NEXT_SYS_SELECT_H = 
NEXT_SYS_SOCKET_H = <sys/socket.h>
NEXT_SYS_STAT_H = <sys/stat.h>
NEXT_SYS_TIME_H = <sys/time.h>
NEXT_UNISTD_H = <unistd.h>
NEXT_WCHAR_H = <wchar.h>
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = gnutls
PACKAGE_BUGREPORT = bug-gnutls@gnu.org
PACKAGE_NAME = GnuTLS
PACKAGE_STRING = GnuTLS 2.9.3
PACKAGE_TARNAME = gnutls
PACKAGE_URL = 
PACKAGE_VERSION = 2.9.3
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PMCCABE = false
PRAGMA_SYSTEM_HEADER = #pragma GCC system_header
PTRDIFF_T_SUFFIX = 
RANLIB = ranlib
REPLACE_BTOWC = 0
REPLACE_CHOWN = 0
REPLACE_CLOSE = 0
REPLACE_DPRINTF = 0
REPLACE_DUP2 = 0
REPLACE_FCHDIR = 0
REPLACE_FCLOSE = 0
REPLACE_FFLUSH = 0
REPLACE_FOPEN = 0
REPLACE_FPRINTF = 0
REPLACE_FPURGE = 0
REPLACE_FREOPEN = 0
REPLACE_FSEEK = 0
REPLACE_FSEEKO = 0
REPLACE_FTELL = 0
REPLACE_FTELLO = 0
REPLACE_GETCWD = 0
REPLACE_GETLINE = 0
REPLACE_GETPAGESIZE = 0
REPLACE_GETTIMEOFDAY = 0
REPLACE_LCHOWN = 0
REPLACE_LSEEK = 0
REPLACE_LSTAT = 0
REPLACE_MBRLEN = 0
REPLACE_MBRTOWC = 0
REPLACE_MBSINIT = 0
REPLACE_MBSNRTOWCS = 0
REPLACE_MBSRTOWCS = 0
REPLACE_MBSTATE_T = 0
REPLACE_MEMCHR = 0
REPLACE_MEMMEM = 0
REPLACE_MKDIR = 0
REPLACE_MKSTEMP = 0
REPLACE_NULL = 0
REPLACE_OBSTACK_PRINTF = 0
REPLACE_PERROR = 0
REPLACE_PRINTF = 0
REPLACE_PUTENV = 0
REPLACE_SELECT = 0
REPLACE_SNPRINTF = 0
REPLACE_SPRINTF = 0
REPLACE_STDIO_WRITE_FUNCS = 0
REPLACE_STRCASESTR = 0
REPLACE_STRDUP = 0
REPLACE_STRERROR = 0
REPLACE_STRSIGNAL = 0
REPLACE_STRSTR = 0
REPLACE_STRTOD = 0
REPLACE_VASPRINTF = 0
REPLACE_VDPRINTF = 0
REPLACE_VFPRINTF = 0
REPLACE_VPRINTF = 0
REPLACE_VSNPRINTF = 0
REPLACE_VSPRINTF = 0
REPLACE_WCRTOMB = 0
REPLACE_WCSNRTOMBS = 0
REPLACE_WCSRTOMBS = 0
REPLACE_WCTOB = 0
REPLACE_WCWIDTH = 0
REPLACE_WRITE = 0
SED = /usr/bin/sed
SERVENT_LIB = 
SET_MAKE = 
SHELL = /bin/sh
SIG_ATOMIC_T_SUFFIX = 
SIZE_T_SUFFIX = 
STDARG_H = 
STDBOOL_H = 
STDDEF_H = 
STDINT_H = 
STRIP = strip
SYS_IOCTL_H = 
SYS_IOCTL_H_HAVE_WINSOCK2_H = 0
SYS_IOCTL_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = 0
SYS_SELECT_H = 
SYS_SOCKET_H = 
SYS_STAT_H = sys/stat.h
SYS_TIME_H = 
UNISTD_H_HAVE_WINSOCK2_H = 0
UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = 0
VALGRIND = valgrind
VERSION = 2.9.3
VOID_UNSETENV = 0
WARN_CFLAGS = 
WCHAR_H = 
WCHAR_T_SUFFIX = 
WERROR_CFLAGS = 
WINT_T_SUFFIX = 
WSTACK_CFLAGS = 
abs_aux_dir = /GNOME1/gnutls-2.9.3/build-aux
abs_builddir = /GNOME1/gnutls-2.9.3/doc
abs_srcdir = /GNOME1/gnutls-2.9.3/doc
abs_top_builddir = /GNOME1/gnutls-2.9.3
abs_top_srcdir = /GNOME1/gnutls-2.9.3
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i486-slackware-linux-gnu
build_alias = i486-slackware-linux
build_cpu = i486
build_os = linux-gnu
build_vendor = slackware
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
gl_LIBOBJS =  asnprintf.o getpass.o printf-args.o printf-parse.o read-file.o vasnprintf.o
gl_LTLIBOBJS =  asnprintf.lo getpass.lo printf-args.lo printf-parse.lo read-file.lo vasnprintf.lo
gltests_LIBOBJS = 
gltests_LTLIBOBJS = 
guile_snarf = /usr/bin/guile-snarf
host = i486-slackware-linux-gnu
host_alias = 
host_cpu = i486
host_os = linux-gnu
host_vendor = slackware
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = /usr/info
install_sh = ${SHELL} /GNOME1/gnutls-2.9.3/build-aux/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
lt_ECHO = echo
mandir = /usr/man
mkdir_p = /usr/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
subdirs =  lib libextra
sysconfdir = /etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
EXTRA_DIST = TODO README.gaa certtool.cfg gnutls.ps gnutls.pdf \
	gnutls.html doxygen/Doxyfile.in doxygen/Doxyfile.orig \
	texinfo.css $(guile_texi) extract-guile-c-doc.scm
SUBDIRS = examples cyclo scripts manpages credentials $(am__append_1)
info_TEXINFOS = gnutls.texi

# Examples.

# Images.  Make sure there are eps + png + pdf of each, plus the source dia.

# Images.  Make sure there are eps + png + pdf of each, plus the source dia.

# Generated texinfos.

# Generated texinfos.
gnutls_TEXINFOS = gnutls.texi fdl-1.3.texi lgpl-2.1.texi gpl-3.0.texi \
	examples/ex-client1.c examples/ex-client2.c \
	examples/ex-session-info.c examples/ex-verify.c \
	examples/ex-cert-select.c examples/ex-client-resume.c \
	examples/ex-client-srp.c examples/ex-client-tlsia.c \
	examples/ex-rfc2818.c examples/ex-serv1.c \
	examples/ex-serv-export.c examples/ex-serv-anon.c \
	examples/ex-serv-pgp.c examples/ex-serv-srp.c \
	examples/ex-alert.c examples/ex-x509-info.c examples/ex-crq.c \
	examples/ex-pkcs12.c gnutls-internals.dia gnutls-internals.eps \
	gnutls-internals.png gnutls-internals.pdf gnutls-layers.dia \
	gnutls-layers.eps gnutls-layers.png gnutls-layers.pdf \
	gnutls-pgp.dia gnutls-pgp.eps gnutls-pgp.png gnutls-pgp.pdf \
	gnutls-x509.dia gnutls-x509.eps gnutls-x509.png \
	gnutls-x509.pdf gnutls-logo.eps gnutls-logo.png \
	gnutls-logo.pdf gnutls-certificate-user-use-case.dia \
	gnutls-certificate-user-use-case.eps \
	gnutls-certificate-user-use-case.pdf \
	gnutls-certificate-user-use-case.png \
	gnutls-client-server-use-case.dia \
	gnutls-client-server-use-case.eps \
	gnutls-client-server-use-case.pdf \
	gnutls-client-server-use-case.png gnutls-extensions_st.dia \
	gnutls-extensions_st.eps gnutls-extensions_st.pdf \
	gnutls-extensions_st.png gnutls-handshake-sequence.dia \
	gnutls-handshake-sequence.eps gnutls-handshake-sequence.pdf \
	gnutls-handshake-sequence.png gnutls-handshake-state.dia \
	gnutls-handshake-state.eps gnutls-handshake-state.pdf \
	gnutls-handshake-state.png gnutls-mod_auth_st.dia \
	gnutls-mod_auth_st.eps gnutls-mod_auth_st.pdf \
	gnutls-mod_auth_st.png gnutls-objects.dia gnutls-objects.eps \
	gnutls-objects.pdf gnutls-objects.png gnutls-api.texi \
	extra-api.texi ia-api.texi x509-api.texi pgp-api.texi \
	error_codes.texi algorithms.texi guile.texi $(guile_texi)
imagesdir = $(infodir)
images_DATA = gnutls-certificate-user-use-case.png		\
	gnutls-extensions_st.png gnutls-handshake-state.png	\
	gnutls-layers.png gnutls-mod_auth_st.png gnutls-pgp.png	\
	gnutls-client-server-use-case.png			\
	gnutls-handshake-sequence.png gnutls-internals.png	\
	gnutls-logo.png gnutls-objects.png gnutls-x509.png

AM_MAKEINFOFLAGS = -I $(top_srcdir)/doc
TEXI2DVI = texi2dvi $(AM_MAKEINFOFLAGS)
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) \
	--no-split --css-include=$(srcdir)/texinfo.css

MAINTAINERCLEANFILES = gnutls-api.texi extra-api.texi ia-api.texi \
	x509-api.texi pgp-api.texi error_codes.texi algorithms.texi \
	$(guile_texi)
AM_CPPFLAGS = -I$(top_srcdir)/lib/includes -I$(top_builddir)/lib/includes
errcodes_SOURCES = errcodes.c
errcodes_LDADD = ../lib/libgnutls.la ../gl/libgnu.la
printlist_SOURCES = printlist.c
printlist_LDADD = ../lib/libgnutls.la ../gl/libgnu.la

# Guile texinfos.
guile_texi = core.c.texi extra.c.texi
BUILT_SOURCES = $(guile_texi)
GUILE_FOR_BUILD = $(GUILE) -L $(top_srcdir)/guile/modules
SNARF_CPPFLAGS = -I$(top_srcdir) -I$(top_builddir)			\
	 -I$(top_srcdir)/lib/includes -I$(top_builddir)/lib/includes	\
	 -I$(top_srcdir)/libextra/includes				\
         -I$(top_srcdir)/guile/src -I$(top_builddir)/guile/src

all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .dvi .html .info .lo .o .obj .pdf .ps .texi
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
errcodes$(EXEEXT): $(errcodes_OBJECTS) $(errcodes_DEPENDENCIES) 
	@rm -f errcodes$(EXEEXT)
	$(LINK) $(errcodes_OBJECTS) $(errcodes_LDADD) $(LIBS)
printlist$(EXEEXT): $(printlist_OBJECTS) $(printlist_DEPENDENCIES) 
	@rm -f printlist$(EXEEXT)
	$(LINK) $(printlist_OBJECTS) $(printlist_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/errcodes.Po
include ./$(DEPDIR)/printlist.Po

.c.o:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

.texi.info:
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  $(am__cd) $(srcdir); \
	else \
	  rc=$$?; \
	  $(am__cd) $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texi.dvi:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texi.pdf:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $<

.texi.html:
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/gnutls.info: gnutls.texi $(srcdir)/version.texi $(gnutls_TEXINFOS)
gnutls.dvi: gnutls.texi $(srcdir)/version.texi $(gnutls_TEXINFOS)
gnutls.pdf: gnutls.texi $(srcdir)/version.texi $(gnutls_TEXINFOS)
gnutls.html: gnutls.texi $(srcdir)/version.texi $(gnutls_TEXINFOS)
$(srcdir)/version.texi:  $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: gnutls.texi $(top_srcdir)/configure
	@(dir=.; test -f ./gnutls.texi || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/gnutls.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi"; \
	      cp vti.tmp $(srcdir)/version.texi)
	-@rm -f vti.tmp
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && \
	    (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf gnutls.aux gnutls.cp gnutls.cps gnutls.fn gnutls.fns gnutls.ky \
	  gnutls.kys gnutls.log gnutls.pg gnutls.tmp gnutls.toc \
	  gnutls.tp gnutls.vr gnutls.vrs

clean-aminfo:
	-test -z "gnutls.dvi gnutls.pdf gnutls.ps gnutls.html" \
	|| rm -rf gnutls.dvi gnutls.pdf gnutls.ps gnutls.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-imagesDATA: $(images_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(imagesdir)" || $(MKDIR_P) "$(DESTDIR)$(imagesdir)"
	@list='$(images_DATA)'; test -n "$(imagesdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(imagesdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(imagesdir)" || exit $$?; \
	done

uninstall-imagesDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(images_DATA)'; test -n "$(imagesdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(imagesdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(imagesdir)" && rm -f $$files

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(imagesdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-aminfo clean-generic clean-libtool \
	clean-noinstPROGRAMS mostlyclean-am

distclean: distclean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-recursive

dvi-am: $(DVIS)

html: html-recursive

html-am: $(HTMLS)

info: info-recursive

info-am: $(INFO_DEPS)

install-data-am: install-imagesDATA install-info-am

install-dvi: install-dvi-recursive

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am:

install-html: install-html-recursive

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  if test -d "$$d$$p"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d$$p"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-recursive

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

install-pdf: install-pdf-recursive

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool mostlyclean-vti

pdf: pdf-recursive

pdf-am: $(PDFS)

ps: ps-recursive

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-imagesDATA \
	uninstall-info-am uninstall-pdf-am uninstall-ps-am

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
	ctags-recursive install install-am install-strip \
	tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-aminfo clean-generic \
	clean-libtool clean-noinstPROGRAMS ctags ctags-recursive \
	dist-info distclean distclean-compile distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am \
	install-imagesDATA install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti mostlyclean \
	mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool mostlyclean-vti pdf pdf-am ps ps-am tags \
	tags-recursive uninstall uninstall-am uninstall-dvi-am \
	uninstall-html-am uninstall-imagesDATA uninstall-info-am \
	uninstall-pdf-am uninstall-ps-am


gnutls-api.texi: $(srcdir)/../lib/*.c
	echo "" > $@-tmp
	for i in $^; do \
		echo -n "Creating documentation for file $$i... " && \
		$(srcdir)/scripts/gdoc -texinfo $$i >> $@-tmp && \
		echo "ok"; \
	done
	$(srcdir)/scripts/sort2.pl < $@-tmp > $@-tmp2
	rm -f $@-tmp
	mv $@-tmp2 $@

x509-api.texi: $(srcdir)/../lib/x509/*.c
	echo "" > $@-tmp
	for i in $^; do \
		echo -n "Creating documentation for file $$i... " && \
		$(srcdir)/scripts/gdoc -texinfo $$i >> $@-tmp && \
		echo "ok"; \
	done
	$(srcdir)/scripts/sort2.pl < $@-tmp > $@-tmp2
	rm -f $@-tmp
	mv $@-tmp2 $@

pgp-api.texi: $(srcdir)/../lib/openpgp/*.c
	echo "" > $@-tmp
	for i in $^; do \
		echo -n "Creating documentation for file $$i... " && \
		$(srcdir)/scripts/gdoc -texinfo $$i >> $@-tmp && \
		echo "ok"; \
	done
	$(srcdir)/scripts/sort2.pl < $@-tmp > $@-tmp2
	rm -f $@-tmp
	mv $@-tmp2 $@

extra-api.texi: $(srcdir)/../libextra/gnutls_extra.c
	echo "" > $@-tmp
	for i in $^; do \
		echo -n "Creating documentation for file $$i... " && \
		$(srcdir)/scripts/gdoc -texinfo $$i >> $@-tmp && \
		echo "ok"; \
	done
	$(srcdir)/scripts/sort2.pl < $@-tmp > $@-tmp2
	rm -f $@-tmp
	mv $@-tmp2 $@

ia-api.texi: $(srcdir)/../libextra/gnutls_ia.c
	echo "" > $@-tmp
	for i in $^; do \
		echo -n "Creating documentation for file $$i... " && \
		$(srcdir)/scripts/gdoc -texinfo $$i >> $@-tmp && \
		echo "ok"; \
	done
	$(srcdir)/scripts/sort2.pl < $@-tmp > $@-tmp2
	rm -f $@-tmp
	mv $@-tmp2 $@

error_codes.texi: $(top_srcdir)/lib/gnutls_errors.c $(srcdir)/errcodes.c
	make $(builddir)/errcodes
	$(builddir)/errcodes > $@-tmp
	mv $@-tmp $@

algorithms.texi: $(srcdir)/printlist.c
	make $(builddir)/printlist
	$(builddir)/printlist > $@-tmp
	mv $@-tmp $@

core.c.texi: $(top_srcdir)/guile/src/core.c
	$(MAKE) -C ../guile/src built-sources &&			\
	$(GUILE_FOR_BUILD) -l "$(srcdir)/extract-guile-c-doc.scm"	\
	   -e '(apply main (cdr (command-line)))'			\
	   -- "$^" "$(CPP)" "$(SNARF_CPPFLAGS) $(CPPFLAGS)"		\
	   > "$@"

extra.c.texi: $(top_srcdir)/guile/src/extra.c
	$(MAKE) -C ../guile/src built-sources &&			\
	$(GUILE_FOR_BUILD) -l "$(srcdir)/extract-guile-c-doc.scm"	\
	   -e '(apply main (cdr (command-line)))'			\
	   -- "$^" "$(CPP)" "$(SNARF_CPPFLAGS) $(CPPFLAGS)"		\
	   > "$@"

#core.c.texi:
#	echo "(Guile not available, documentation not generated.)" > $@

#extra.c.texi:
#	echo "(Guile not available, documentation not generated.)" > $@

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
