# Makefile.in generated by automake 1.10.3 from Makefile.am.
# docs/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




pkgdatadir = $(datadir)/glibmm
pkglibdir = $(libdir)/glibmm
pkgincludedir = $(includedir)/glibmm
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i486-slackware-linux-gnu
host_triplet = i486-slackware-linux-gnu
DIST_COMMON = $(dist_docimages_DATA) $(dist_doctool_DATA) \
	$(dist_noinst_DATA) $(dist_reference_DATA) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(top_srcdir)/build/doc-reference.am \
	$(top_srcdir)/gio/giomm/filelist.am \
	$(top_srcdir)/gio/src/filelist.am \
	$(top_srcdir)/glib/glibmm/filelist.am \
	$(top_srcdir)/glib/src/filelist.am
subdir = docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/build/c_std.m4 \
	$(top_srcdir)/build/cxx.m4 $(top_srcdir)/build/cxx_std.m4 \
	$(top_srcdir)/build/dk-feature.m4 \
	$(top_srcdir)/build/libtool.m4 \
	$(top_srcdir)/build/ltoptions.m4 \
	$(top_srcdir)/build/ltsugar.m4 \
	$(top_srcdir)/build/ltversion.m4 \
	$(top_srcdir)/build/lt~obsolete.m4 \
	$(top_srcdir)/build/macros.m4 $(top_srcdir)/build/sun.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h \
	$(top_builddir)/glib/glibmmconfig.h \
	$(top_builddir)/gio/giommconfig.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(docimagesdir)" \
	"$(DESTDIR)$(doctooldir)" "$(DESTDIR)$(referencedir)"
dist_docimagesDATA_INSTALL = $(INSTALL_DATA)
dist_doctoolDATA_INSTALL = $(INSTALL_DATA)
dist_referenceDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_docimages_DATA) $(dist_doctool_DATA) $(dist_noinst_DATA) \
	$(dist_reference_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /downloads/Programs/glibmm-2.27.93/build/missing --run aclocal-1.10
ACLOCAL_FLAGS = 
AMTAR = ${SHELL} /downloads/Programs/glibmm-2.27.93/build/missing --run tar
AR = ar
AS = as
AUTOCONF = ${SHELL} /downloads/Programs/glibmm-2.27.93/build/missing --run autoconf
AUTOHEADER = ${SHELL} /downloads/Programs/glibmm-2.27.93/build/missing --run autoheader
AUTOMAKE = ${SHELL} /downloads/Programs/glibmm-2.27.93/build/missing --run automake-1.10
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DOCINSTALL_FLAGS = -l 'libstdc++.tag@http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/' -l 'libsigc++-2.0.tag@file:///usr/share/doc/libsigc++-2.0/reference/html/'
DOT = /usr/bin/dot
DOXYGEN = /usr/bin/doxygen
DOXYGEN_TAGFILES = "/usr/share/mm-common/doctags/libstdc++.tag=http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen" "/usr/share/doc/libsigc++-2.0/reference/libsigc++-2.0.tag=http://library.gnome.org/devel/libsigc++/unstable"
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = 
FGREP = /usr/bin/grep -F
GIOMM_API_VERSION = 2.4
GIOMM_CFLAGS = -pthread -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/gio-unix-2.0/  
GIOMM_LIBS = -pthread -Wl,--export-dynamic -lsigc-2.0 -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0  
GIOMM_MAJOR_VERSION = 2
GIOMM_MICRO_VERSION = 93
GIOMM_MINOR_VERSION = 27
GIOMM_MODULE_NAME = giomm-2.4
GIOMM_VERSION = 2.27.93
GLIBMM_API_VERSION = 2.4
GLIBMM_CFLAGS = -pthread -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
GLIBMM_LIBS = -pthread -Wl,--export-dynamic -lsigc-2.0 -lgobject-2.0 -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0  
GLIBMM_MAJOR_VERSION = 2
GLIBMM_MICRO_VERSION = 93
GLIBMM_MINOR_VERSION = 27
GLIBMM_MODULE_NAME = glibmm-2.4
GLIBMM_VERSION = 2.27.93
GLIBMM_WXXFLAGS = -Wall
GLIB_COMPILE_SCHEMAS = /usr/bin/glib-compile-schemas
GREP = /usr/bin/grep
GSETTINGS_DISABLE_SCHEMAS_COMPILE = 
GTHREAD_CFLAGS = -pthread  
GTHREAD_LIBS = -pthread -lgthread-2.0 -lrt -lglib-2.0  
INSTALL = /usr/bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/i486-slackware-linux/bin/ld
LDFLAGS = 
LIBGLIBMM_SO_VERSION = 4:0:3
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
M4 = m4
MAINT = #
MAKEINFO = ${SHELL} /downloads/Programs/glibmm-2.27.93/build/missing --run makeinfo
MKDIR_P = /usr/bin/mkdir -p
MMDOCTOOLDIR = ${top_srcdir}/docs
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = glibmm
PACKAGE_BUGREPORT = http://bugzilla.gnome.org/enter_bug.cgi?product=glibmm
PACKAGE_NAME = glibmm
PACKAGE_STRING = glibmm 2.27.93
PACKAGE_TARNAME = glibmm
PACKAGE_URL = http://www.gtkmm.org/
PACKAGE_VERSION = 2.27.93
PATH_SEPARATOR = :
PERL = /usr/local/bin/perl
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = /usr/local/lib/pkgconfig:/usr/lib/pkgconfig
RANLIB = ranlib
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
VERSION = 2.27.93
XSLTPROC = /usr/bin/xsltproc
abs_builddir = /downloads/Programs/glibmm-2.27.93/docs
abs_srcdir = /downloads/Programs/glibmm-2.27.93/docs
abs_top_builddir = /downloads/Programs/glibmm-2.27.93
abs_top_srcdir = /downloads/Programs/glibmm-2.27.93
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=posix -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = i486-slackware-linux-gnu
build_alias = i486-slackware-linux
build_cpu = i486
build_os = linux-gnu
build_vendor = slackware
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
gsettingsschemadir = ${datarootdir}/glib-2.0/schemas
host = i486-slackware-linux-gnu
host_alias = 
host_cpu = i486
host_os = linux-gnu
host_vendor = slackware
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = /usr/info
install_sh = $(SHELL) /downloads/Programs/glibmm-2.27.93/build/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
lt_ECHO = echo
mandir = /usr/man
mkdir_p = /usr/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
glibmm_files_defs = \
	glib.defs		\
	glib_enums.defs		\
	glib_functions.defs	\
	glib_extra_objects.defs	\
	gmodule_enums.defs	\
	gmodule_functions.defs	\
	gobject.defs		\
	gobject_enums.defs	\
	gobject_functions.defs	\
	glib_docs.xml		\
	glib_docs_override.xml

glibmm_files_hg = \
	balancedtree.hg		\
	checksum.hg		\
	convert.hg		\
	date.hg			\
	fileutils.hg		\
	iochannel.hg		\
	keyfile.hg		\
	markup.hg		\
	module.hg		\
	nodetree.hg		\
	optioncontext.hg	\
	optionentry.hg		\
	optiongroup.hg		\
	regex.hg		\
	shell.hg		\
	spawn.hg		\
	thread.hg		\
	unicode.hg		\
	uriutils.hg		\
	valuearray.hg		\
	variant.hg \
	variantiter.hg \
	varianttype.hg

glibmm_files_ccg = $(glibmm_files_hg:.hg=.ccg)
glibmm_files_cc_m4 = value_basictypes.cc.m4 variant_basictypes.cc.m4
glibmm_files_h_m4 = signalproxy.h.m4 value_basictypes.h.m4 \
	variant_basictypes.h.m4

glibmm_files_built_cc = $(glibmm_files_hg:.hg=.cc) $(glibmm_files_cc_m4:.m4=) wrap_init.cc
glibmm_files_built_h = $(glibmm_files_hg:.hg=.h) $(glibmm_files_h_m4:.m4=)
glibmm_files_built_ph = $(patsubst %.hg,private/%_p.h,$(glibmm_files_hg))
glibmm_files_extra_cc = \
	class.cc			\
	containers.cc			\
	debug.cc			\
	dispatcher.cc			\
	error.cc			\
	exception.cc			\
	exceptionhandler.cc		\
	init.cc				\
	interface.cc			\
	main.cc				\
	miscutils.cc			\
	object.cc			\
	objectbase.cc			\
	pattern.cc			\
	property.cc			\
	propertyproxy.cc		\
	propertyproxy_base.cc		\
	quark.cc			\
	random.cc			\
	sarray.cc			\
	signalproxy.cc			\
	signalproxy_connectionnode.cc	\
	streamiochannel.cc		\
	stringutils.cc			\
	threadpool.cc			\
	timer.cc			\
	timeval.cc			\
	ustring.cc			\
	utility.cc			\
	value.cc			\
	value_custom.cc			\
	vectorutils.cc			\
	wrap.cc

glibmm_files_extra_h = \
	arrayhandle.h			\
	class.h				\
	containerhandle_shared.h	\
	containers.h			\
	debug.h				\
	dispatcher.h			\
	error.h				\
	exception.h			\
	exceptionhandler.h		\
	helperlist.h			\
	i18n-lib.h			\
	i18n.h				\
	init.h				\
	interface.h			\
	listhandle.h			\
	main.h				\
	miscutils.h			\
	object.h			\
	objectbase.h			\
	pattern.h			\
	priorities.h			\
	property.h			\
	propertyproxy.h			\
	propertyproxy_base.h		\
	quark.h				\
	random.h			\
	refptr.h			\
	sarray.h			\
	signalproxy_connectionnode.h	\
	slisthandle.h			\
	streamiochannel.h		\
	stringutils.h			\
	threadpool.h			\
	timer.h				\
	timeval.h			\
	ustring.h			\
	utility.h			\
	value.h				\
	value_custom.h			\
	vectorutils.h			\
	wrap.h				\
	wrap_init.h

glibmm_files_extra_ph = \
	private/interface_p.h		\
	private/object_p.h

giomm_files_defs = \
	gio.defs			\
	gio_enums.defs			\
	gio_methods.defs		\
	gio_extra_objects.defs		\
	gio_unix_functions.defs		\
	gio_others.defs			\
	gio_signals.defs		\
	gio_vfuncs.defs			\
	gio_docs.xml			\
	gio_docs_override.xml

giomm_files_any_hg = \
	actiongroup.hg			\
	appinfo.hg			\
	application.hg			\
	applicationcommandline.hg			\
	asyncinitable.hg		\
	asyncresult.hg			\
	bufferedinputstream.hg		\
	bufferedoutputstream.hg		\
	cancellable.hg			\
	credentials.hg			\
	datainputstream.hg		\
	dataoutputstream.hg		\
        dbusaddress.hg \
	dbusauthobserver.hg \
	dbusconnection.hg \
	dbuserror.hg \
	dbusintrospection.hg \
	dbusmessage.hg \
	dbusmethodinvocation.hg \
	dbusownname.hg \
	dbusproxy.hg \
	dbusserver.hg \
	dbusutils.hg \
	dbuswatchname.hg \
	drive.hg			\
	emblem.hg			\
	emblemedicon.hg			\
	enums.hg			\
	error.hg			\
	file.hg				\
	fileattributeinfo.hg		\
	fileattributeinfolist.hg	\
	fileenumerator.hg		\
	fileicon.hg			\
	fileinfo.hg			\
	fileinputstream.hg		\
	fileiostream.hg			\
	filemonitor.hg			\
	filenamecompleter.hg		\
	fileoutputstream.hg		\
	filterinputstream.hg		\
	filteroutputstream.hg		\
	icon.hg				\
	inetaddress.hg			\
	inetsocketaddress.hg		\
	initable.hg			\
	inputstream.hg			\
	iostream.hg			\
	loadableicon.hg			\
	memoryinputstream.hg		\
	memoryoutputstream.hg		\
	mount.hg			\
	mountoperation.hg		\
	networkaddress.hg		\
	networkservice.hg		\
	outputstream.hg			\
	proxy.hg \
	proxyaddress.hg \
	proxyresolver.hg \
	resolver.hg			\
	seekable.hg			\
	settings.hg			\
	settingsbackend.hg			\
	socket.hg			\
	socketaddress.hg		\
	socketaddressenumerator.hg	\
	socketclient.hg		\
	socketconnectable.hg		\
	socketconnection.hg		\
	socketcontrolmessage.hg	\
	socketlistener.hg		\
	socketservice.hg		\
	srvtarget.hg			\
	tcpconnection.hg			\
	threadedsocketservice.hg	\
	themedicon.hg			\
	volume.hg			\
	volumemonitor.hg

giomm_files_posix_hg = \
	desktopappinfo.hg		\
	unixconnection.hg		\
	unixcredentialsmessage.hg \
	unixfdlist.hg \
	unixfdmessage.hg \
	unixinputstream.hg		\
	unixoutputstream.hg \
	unixsocketaddress.hg

giomm_files_arch_hg = $(giomm_files_posix_hg)
#giomm_files_arch_hg = 
giomm_files_used_hg = $(giomm_files_any_hg) $(giomm_files_arch_hg)
giomm_files_hg = $(giomm_files_any_hg) $(giomm_files_posix_hg)
giomm_files_ccg = $(giomm_files_hg:.hg=.ccg)
giomm_files_built_cc = $(giomm_files_used_hg:.hg=.cc) wrap_init.cc
giomm_files_built_h = $(giomm_files_used_hg:.hg=.h)
giomm_files_built_ph = $(patsubst %.hg,private/%_p.h,$(giomm_files_used_hg))
giomm_files_extra_cc = contenttype.cc init.cc slot_async.cc
giomm_files_extra_h = contenttype.h init.h wrap_init.h
giomm_files_extra_ph = 
glibmm_files_h = $(filter-out wrap_init.h,$(glibmm_files_built_h) $(glibmm_files_extra_h))
giomm_files_h = $(filter-out wrap_init.h,$(giomm_files_built_h) $(giomm_files_extra_h))
book_name = $(GLIBMM_MODULE_NAME)
doc_input = $(addprefix $(top_srcdir)/glib/glibmm/,$(glibmm_files_h)) \
            $(addprefix $(top_srcdir)/gio/giomm/,$(giomm_files_h)) \
            $(top_srcdir)/glib/glibmm.h

doctooldir = $(datadir)/$(GLIBMM_MODULE_NAME)/doctool
dist_doctool_DATA = doc-install.pl doc-postprocess.pl doxygen.css tagfile-to-devhelp2.xsl
docimagesdir = $(libdocdir)/images
dist_docimages_DATA = images/gtkmm_logo.gif images/top.gif

# Function: $(call vpath_listall,PATTERN ...)
# Get all filenames which match a PATTERN from the list.  Look for files
# relative to either the current directory or $(srcdir).  Strip $(srcdir)/
# again before returning and remove any duplicates.
vpath_srclist = $(patsubst $(srcdir)/%,%,$(wildcard $(addprefix $(srcdir)/,$(1))))
vpath_listall = $(sort $(wildcard $(1)) $(if $(srcdir:.=),$(vpath_srclist)))

# Installation directories.
libdocdir = $(datarootdir)/doc/$(book_name)
referencedir = $(libdocdir)/reference
htmlrefdir = $(referencedir)/html
devhelpdir = $(datadir)/devhelp/books/$(book_name)
#doc_inst_targets = 
doc_inst_targets = install-htmlref install-devhelp
#doc_inst_files = 
doc_inst_files = $(doxytagfile)
#doc_dist_files = 
doc_dist_files = $(devhelpfile) $(call vpath_listall,$(htmlref_patterns))
dist_reference_DATA = $(strip $(doc_inst_files))
dist_noinst_DATA = $(strip $(doc_dist_files)) \
	internal/documentation_generation.txt \
	internal/gmmproc_internals.txt internal/using_gmmproc.txt \
	internal/gtk_entry.dia
DISTCLEANFILES = $(doc_outdir)/doxygen.log
MAINTAINERCLEANFILES = $(doxytagfile) $(devhelpfile) $(doc_outdir)/html/*

# The generic bit of the doc-install.pl command line.
doc_install_cmd = $(doc_install) --verbose --mode=0644

# Transform $(datarootdir) into a URI to match MM_ARG_WITH_TAGFILE_DOC().
datarootdir_esc = $(subst $(subst ,, ),%20,$(subst \,/,$(datarootdir)))
docdir_base_uri = file:///$(patsubst /%,%,$(datarootdir_esc:/=))/doc

# The command and options used to install the files from the HTML reference
# documentation.  The $(subst) magic translates external tag references from
# absolute to relative paths if the destination is on the local file system
# and installed under the same prefix as the package being built.
htmlref_relinst = $(subst @$(docdir_base_uri)/,@../../../,$(DOCINSTALL_FLAGS))
htmlref_install = $(doc_install_cmd) $(htmlref_relinst)

# The command and options used to install the Devhelp file.
devhelp_install = $(doc_install_cmd) --book-base='$(htmlrefdir:/=)'

# Helper variables to replicate each pattern with a $(srcdir)/ prefix.
# Also add quoting to prevent the shell from expanding the patterns.
htmlref_patterns_dup = $(foreach item,$(htmlref_patterns),'$(item)' '$(srcdir)/$(item)')
htmlref_patterns_quote = $(patsubst %,'%',$(htmlref_patterns))
htmlref_patterns_vpath = $(if $(srcdir:.=),$(htmlref_patterns_dup),$(htmlref_patterns_quote))

# Expand to a list of -name 'PATTERN' arguments for use with 'find'.
htmlref_find_patterns = $(patsubst %,-name '%' -o,$(notdir $(htmlref_patterns))) -false

# The parameters to the Doxygen-to-Devhelp XSLT script
dh_xsl_params = --stringparam book_title '$(book_title)' \
		--stringparam book_name '$(book_name)' \
		--stringparam book_base html


# Generated configuration files which, when updated, should cause the
# reference documentation to be rebuilt.
doc_config_deps = $(CONFIG_HEADER) $(srcdir)/$(doc_config).in $(srcdir)/Makefile.in
doc_dependencies = 

# Regenerate the documentation automatically only in maintainer mode.
# Depend on the generated configuration header files to trigger a rebuild
# if a configuration value changed.  The configuration header files only
# have their timestamp modified when the content actually changed, which
# is not the case for any other files generated by configure.
#doc_dependencies = $(doc_config_deps) $(doc_input)
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/glib/src/filelist.am $(top_srcdir)/glib/glibmm/filelist.am $(top_srcdir)/gio/src/filelist.am $(top_srcdir)/gio/giomm/filelist.am $(top_srcdir)/build/doc-reference.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  docs/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  docs/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-dist_docimagesDATA: $(dist_docimages_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docimagesdir)" || $(MKDIR_P) "$(DESTDIR)$(docimagesdir)"
	@list='$(dist_docimages_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_docimagesDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docimagesdir)/$$f'"; \
	  $(dist_docimagesDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docimagesdir)/$$f"; \
	done

uninstall-dist_docimagesDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_docimages_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(docimagesdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(docimagesdir)/$$f"; \
	done
install-dist_doctoolDATA: $(dist_doctool_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(doctooldir)" || $(MKDIR_P) "$(DESTDIR)$(doctooldir)"
	@list='$(dist_doctool_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_doctoolDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(doctooldir)/$$f'"; \
	  $(dist_doctoolDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(doctooldir)/$$f"; \
	done

uninstall-dist_doctoolDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_doctool_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(doctooldir)/$$f'"; \
	  rm -f "$(DESTDIR)$(doctooldir)/$$f"; \
	done
install-dist_referenceDATA: $(dist_reference_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(referencedir)" || $(MKDIR_P) "$(DESTDIR)$(referencedir)"
	@list='$(dist_reference_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_referenceDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(referencedir)/$$f'"; \
	  $(dist_referenceDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(referencedir)/$$f"; \
	done

uninstall-dist_referenceDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_reference_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(referencedir)/$$f'"; \
	  rm -f "$(DESTDIR)$(referencedir)/$$f"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(DATA) all-local
installdirs:
	for dir in "$(DESTDIR)$(docimagesdir)" "$(DESTDIR)$(doctooldir)" "$(DESTDIR)$(referencedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local install-dist_docimagesDATA \
	install-dist_doctoolDATA install-dist_referenceDATA

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_docimagesDATA uninstall-dist_doctoolDATA \
	uninstall-dist_referenceDATA uninstall-local

.MAKE: install-am install-strip

.PHONY: all all-am all-local check check-am clean clean-generic \
	clean-libtool distclean distclean-generic distclean-libtool \
	distdir dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-data-local \
	install-dist_docimagesDATA install-dist_doctoolDATA \
	install-dist_referenceDATA install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-dist_docimagesDATA uninstall-dist_doctoolDATA \
	uninstall-dist_referenceDATA uninstall-local


# The name of the sub-directory where the generated documentation
# will be placed.
doc_outdir ?= reference

# The name of the Doxygen configuration file.
doc_config ?= $(doc_outdir)/Doxyfile

# The base URL where the online documentation for C++ binding modules
# is located, including the trailing slash.
pubdocbase ?= http://library.gnome.org/devel/

# The URL of the module's online HTML reference documentation, which
# may or may not end in a trailing slash.
htmlrefpub ?= $(pubdocbase)$(PACKAGE_TARNAME)/unstable/

# The title of the generated Devhelp book.
book_title ?= $(PACKAGE_NAME) Reference Manual

# A list of wildcard patterns matching the files from the HTML directory
# generated by Doxygen which should be distributed and installed.
htmlref_patterns ?= $(addprefix $(doc_outdir)/html/*.,css gif html png)

# Locations of utilities shipped with glibmm.  Made overridable
# in case the installed utilities cannot be used for some reason.
doc_postprocess     ?= $(PERL) -- "$(MMDOCTOOLDIR)/doc-postprocess.pl"
doc_install         ?= $(PERL) -- "$(MMDOCTOOLDIR)/doc-install.pl"
tagfile_to_devhelp2 ?= "$(MMDOCTOOLDIR)/tagfile-to-devhelp2.xsl"

# Names of the main output files.
doxytagfile ?= $(doc_outdir)/$(book_name).tag
devhelpfile ?= $(doc_outdir)/$(book_name).devhelp2

# Explicitly depend on the files to be distributed or installed.
all-local: $(doc_inst_files) $(doc_dist_files)

# Hook up custom rules for translating references to external documentation
# to the actual location at install time.
install-data-local: $(doc_inst_targets)

# Hook up corresponding custom uninstall rules.
uninstall-local: $(addprefix un,$(doc_inst_targets))

# Install the HTML reference documentation files with just one invocation
# of doc-install.pl to speed up the build process.  Make use of the --glob
# option, which tells it to perform filename globbing itself, like 'find'.
# This helps to avoid excessively long command lines, as some platforms
# have rather restrictive limits.
install-htmlref: $(doc_outdir)/html/index.html
	@$(NORMAL_INSTALL)
	$(MKDIR_P) '$(DESTDIR)$(htmlrefdir)'
	$(htmlref_install) -t '$(DESTDIR)$(htmlrefdir)' --glob -- $(htmlref_patterns_vpath)

# Delete files from the html installation directory.  Avoid recursive
# directory removal, and apply the same wildcard pattern as was used to
# select files for installation.
uninstall-htmlref:
	@$(NORMAL_UNINSTALL)
	(cd '$(DESTDIR)$(htmlrefdir)' 2>/dev/null || exit 0; \
	 find . -type f '(' $(htmlref_find_patterns) ')' -exec rm -f '{}' '+')
	-test ! -r '$(DESTDIR)$(htmlrefdir)' || rmdir '$(DESTDIR)$(htmlrefdir)'

# Install the Devhelp file, translating the base path on the fly.
install-devhelp: $(devhelpfile)
	@$(NORMAL_INSTALL)
	$(MKDIR_P) '$(DESTDIR)$(devhelpdir)'
	$(devhelp_install) -t '$(DESTDIR)$(devhelpdir)' -- $^

# Remove the installed Devhelp file and directory.
uninstall-devhelp:
	@$(NORMAL_UNINSTALL)
	rm -f '$(DESTDIR)$(devhelpdir)/$(notdir $(devhelpfile))'
	-test ! -r '$(DESTDIR)$(devhelpdir)' || rmdir '$(DESTDIR)$(devhelpdir)'

# Regenerate the Doxygen configuration file automatically.  In the
# top-level build directory Automake already takes care of this.
 ifneq ($(subdir),.)
$(doc_config): $(srcdir)/$(doc_config).in $(top_builddir)/config.status
	$(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

 endif
# Make sure that the documentation will always have been generated before
# executing commands of a rule that depends on files in $(doc_outdir)/html/.
$(doc_outdir)/html/%: | $(doxytagfile)

# Run Doxygen to build the reference documentation. The generated tag file
# also functions as time stamp target for the documentation as a whole.
$(doxytagfile): $(doc_dependencies) | $(doc_config)
	-$(AM_V_at)rm -f $@
	-$(AM_V_at)rm -fr $(doc_outdir)/html
	$(AM_V_GEN)(echo '@INCLUDE =' $(doc_config) && echo 'INPUT =' $(doc_input)) | $(DOXYGEN) -
	$(AM_V_at)$(doc_postprocess) '$(doc_outdir)/html/*.html'

# Run XSL transformation to generate a Devhelp book from a Doxygen tag file.
%.devhelp2: %.tag
	$(AM_V_GEN)$(XSLTPROC) $(dh_xsl_params) -o $@ $(tagfile_to_devhelp2) $<

.PHONY: install-htmlref uninstall-htmlref install-devhelp uninstall-devhelp

# Instruct GNU make to delete the targets of a rule after it failed, in
# order to avoid the complication of handling that situation manually.
.DELETE_ON_ERROR:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
