# Makefile.in generated by automake 1.10.2 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



pkgdatadir = $(datadir)/cutter
pkglibdir = $(libdir)/cutter
pkgincludedir = $(includedir)/cutter
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i486-slackware-linux-gnu
host_triplet = i486-slackware-linux-gnu
subdir = doc
DIST_COMMON = $(dist_man1_MANS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4macros/cutter.m4 \
	$(top_srcdir)/m4macros/intltool.m4 \
	$(top_srcdir)/m4macros/libtool.m4 \
	$(top_srcdir)/m4macros/ltoptions.m4 \
	$(top_srcdir)/m4macros/ltsugar.m4 \
	$(top_srcdir)/m4macros/ltversion.m4 \
	$(top_srcdir)/m4macros/lt~obsolete.m4 \
	$(top_srcdir)/m4macros/shave.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)"
NROFF = nroff
MANS = $(dist_man1_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /GNOME1/X/cutter-1.0.8/config/missing --run aclocal-1.10
ALL_LINGUAS = 
AMTAR = ${SHELL} /GNOME1/X/cutter-1.0.8/config/missing --run tar
AM_MAKEFLAGS = 
AR = ar
AS = as
AUTOCONF = ${SHELL} /GNOME1/X/cutter-1.0.8/config/missing --run autoconf
AUTOHEADER = ${SHELL} /GNOME1/X/cutter-1.0.8/config/missing --run autoheader
AUTOMAKE = ${SHELL} /GNOME1/X/cutter-1.0.8/config/missing --run automake-1.10
AWK = gawk
BFD_LIBS = 
CAIRO_CFLAGS = -D_REENTRANT -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12  
CAIRO_LIBS = -lcairo  
CAIRO_PDF_CFLAGS = -D_REENTRANT -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12  
CAIRO_PDF_LIBS = -lz -lcairo  
CATALOGS = 
CATOBJEXT = .gmo
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -Wpointer-arith -Wcast-align
COVERAGE_CFLAGS = 
COVERAGE_INFO_FILE = coverage.info
COVERAGE_REPORT_DIR = coverage
CPP = gcc -E
CPPFLAGS = 
CUTTER = $(top_builddir)/cutter/cutter$(EXEEXT)
CUTTER_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -DG_DISABLE_DEPRECATED -DUI_MODULEDIR=\""$(ui_moduledir)"\" -DUI_FACTORY_MODULEDIR=\""$(ui_factory_moduledir)"\" -DREPORT_MODULEDIR=\""$(report_moduledir)"\" -DREPORT_FACTORY_MODULEDIR=\""$(report_factory_moduledir)"\" -DSTREAM_MODULEDIR=\""$(stream_moduledir)"\" -DSTREAM_FACTORY_MODULEDIR=\""$(stream_factory_moduledir)"\" -DFACTORY_MODULEDIR=\""$(factory_moduledir)"\"
CUTTER_VERSION = 1.0.8
CUTTER_VERSION_MAJOR = 1
CUTTER_VERSION_MICRO = 8
CUTTER_VERSION_MINOR = 0
CXX = 
CYGPATH_W = echo
DATADIRNAME = share
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = 
F77 = 
FC = 
FGREP = /usr/bin/grep -F
GDK_PIXBUF_CFLAGS = -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
GDK_PIXBUF_LIBS = -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -lglib-2.0  
GENHTML = 
GENHTML_OPTIONS = 
GETTEXT_PACKAGE = cutter
GLIB_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
GLIB_GENMARSHAL = glib-genmarshal
GLIB_LIBS = -Wl,--export-dynamic -pthread -lgmodule-2.0 -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0  
GLIB_MKENUMS = glib-mkenums
GLIB_REQUIRED = 2.16.0
GMOFILES = 
GMSGFMT = /usr/bin/msgfmt
GOBJECT_QUERY = gobject-query
GOFFICE_CFLAGS = 
GOFFICE_LIBS = 
GREP = /usr/bin/grep
GSTREAMER_CFLAGS = -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2  
GSTREAMER_LIBS = -pthread -lgstbase-0.10 -lgstreamer-0.10 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lxml2 -lglib-2.0  
GTKDOC_CHECK = /usr/bin/gtkdoc-check
GTK_CFLAGS = -D_REENTRANT -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12  
GTK_LIBS = -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lgio-2.0 -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite -lXdamage -lpangoft2-1.0 -lXfixes -lcairo -lX11 -lpango-1.0 -lm -lfreetype -lz -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lglib-2.0  
HTML_DIR = ${datadir}/gtk-doc/html
INSTALL = /usr/bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INSTOBJEXT = .mo
INTLLIBS = 
INTLTOOL_EXTRACT = /usr/bin/intltool-extract
INTLTOOL_MERGE = /usr/bin/intltool-merge
INTLTOOL_PERL = /usr/local/bin/perl
INTLTOOL_UPDATE = /usr/bin/intltool-update
LCOV = 
LD = /usr/i486-slackware-linux/bin/ld
LDFLAGS = 
LIBOBJS = 
LIBS = 
LIBSOUP_CFLAGS = -I/usr/include/libsoup-2.4 -I/usr/include/libxml2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
LIBSOUP_LIBS = -lsoup-2.4 -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0  
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_EXPORT_OPTIONS = -export-symbols-regex "^[^_].*"
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
LT_AGE = 1
LT_CURRENT = 1
LT_CURRENT_MINUS_AGE = 0
LT_REVISION = 0
LT_VERSION_INFO = 1:0:1
MAINT = #
MAKEFLAGS = 
MAKEINFO = ${SHELL} /GNOME1/X/cutter-1.0.8/config/missing --run makeinfo
MKDIR_P = /usr/bin/mkdir -p
MKINSTALLDIRS = config/mkinstalldirs
MSGFMT = /usr/bin/msgfmt
MSGFMT_OPTS = -c
MSGMERGE = /usr/bin/msgmerge
NM = /usr/bin/nm -B
NMEDIT = 
NO_STRICT_ALIASING_CFLAGS = -fno-strict-aliasing
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = cutter
PACKAGE_BUGREPORT = kou@clear-code.com
PACKAGE_NAME = cutter
PACKAGE_STRING = cutter 1.0.8
PACKAGE_TARNAME = cutter
PACKAGE_TITLE = Cutter
PACKAGE_VERSION = 1.0.8
PANGO_CAIRO_CFLAGS = -D_REENTRANT -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12  
PANGO_CAIRO_LIBS = -lpangocairo-1.0 -lcairo -lpangoft2-1.0 -lpango-1.0 -lm -lfreetype -lz -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lglib-2.0  
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
POFILES = 
POSUB = po
PO_IN_DATADIR_FALSE = 
PO_IN_DATADIR_TRUE = 
Q = $(V:1=)
RANLIB = ranlib
RD2 = rd2-not-found
RUBY = /usr/bin/ruby
SED = /usr/bin/sed
SET_MAKE = 
SF_HOST = root,cutter@web.sourceforge.net
SF_HTDOCS = root,cutter@web.sourceforge.net:/home/groups/c/cu/cutter/htdocs
SF_HTDOCS_PATH = /home/groups/c/cu/cutter/htdocs
SF_PROJECT_NAME = Cutter
SF_REPOS = https://cutter.svn.sourceforge.net/svnroot/cutter/cutter
SF_USER = 
SF_USER_OPTION = 
SHELL = /bin/sh
STRIP = strip
USE_NLS = yes
V = 1
VERSION = 1.0.8
WINDRES = 
XGETTEXT = /usr/bin/xgettext
abs_builddir = /GNOME1/X/cutter-1.0.8/doc
abs_srcdir = /GNOME1/X/cutter-1.0.8/doc
abs_top_builddir = /GNOME1/X/cutter-1.0.8
abs_top_srcdir = /GNOME1/X/cutter-1.0.8
ac_ct_CC = gcc
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i486-slackware-linux-gnu
build_alias = i486-slackware-linux
build_cpu = i486
build_os = linux-gnu
build_vendor = slackware
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
factory_moduledir = ${moduledir}/factory
gst_pluginsdir = /usr/lib/gstreamer-0.10
host = i486-slackware-linux-gnu
host_alias = 
host_cpu = i486
host_os = linux-gnu
host_vendor = slackware
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = /usr/info
install_sh = $(SHELL) /GNOME1/X/cutter-1.0.8/config/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
lt_ECHO = echo
mandir = /usr/man
mkdir_p = /usr/bin/mkdir -p
moduledir = ${libdir}/$(PACKAGE)/module
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
report_factory_moduledir = ${moduledir}/factory/report
report_moduledir = ${moduledir}/report
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
shavedir = 
srcdir = .
stream_factory_moduledir = ${moduledir}/factory/stream
stream_moduledir = ${moduledir}/stream
sysconfdir = /etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
ui_factory_moduledir = ${moduledir}/factory/ui
ui_moduledir = ${moduledir}/ui
SUBDIRS = reference
EXTRA_DIST = cutter.rd cutter.rd.ja install-to-debian.rd \
	install-to-debian.rd.ja install-to-cygwin.rd \
	install-to-cygwin.rd.ja install-to-others.rd \
	install-to-others.rd.ja $(svg_images) $(dist_ja_man1_mans)
svg_images = \
	cutter-accelerate-development-cycle.svg	\
	cutter-two-important-features.svg	\
	cutter-easy-to-debug.svg		\
	cutter-easy-to-write.svg

dist_man1_MANS = \
	cutter.man

ja_man1dir = $(mandir)/ja/man1
dist_ja_man1_mans = \
	cutter.jman

MAINTAINERCLEANFILES = $(dist_man1_MANS) $(dist_ja_man1_mans)
RD2LIB_DIR = $(top_srcdir)/misc
RD2MAN_LIB_FILE = rd2man-lib.rb
RD2MAN_LIB = $(RD2LIB_DIR)/$(RD2MAN_LIB_FILE)
RD2MAN = $(RUBY) -I $(RD2LIB_DIR) $(RD2) -r $(RD2MAN_LIB_FILE)
all: all-recursive

.SUFFIXES:
.SUFFIXES: .jman .man .png .rd .svg
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $$i; then file=$$i; \
	  else file=$(srcdir)/$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(MANS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-data-local install-man

install-dvi: install-dvi-recursive

install-exec-am:

install-html: install-html-recursive

install-info: install-info-recursive

install-man: install-man1

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-local uninstall-man

uninstall-man: uninstall-man1

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic clean-libtool \
	ctags ctags-recursive distclean distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-data-local install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
	ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-local uninstall-man uninstall-man1


jman: $(dist_ja_man1_mans)

#install-data-local: cutter.jman
install-data-local:
	test -z "$(DESTDIR)$(ja_man1dir)" || $(MKDIR_P) "$(DESTDIR)$(ja_man1dir)"
	@for jman in $(dist_ja_man1_mans); do			\
	  test -f "$${jman}" || break;				\
	  jman_path=$(top_builddir)/doc/$${jman};		\
	  jman_file=`echo $${jman} | sed -e s/jman$$/1/`;	\
	  echo $(INSTALL_DATA) $${jman_path}			\
	    "$(DESTDIR)$(ja_man1dir)"/$${jman_file};		\
	  $(INSTALL_DATA) $${jman_path}				\
	    "$(DESTDIR)$(ja_man1dir)"/$${jman_file};		\
	done

uninstall-local:
	@for jman in $(dist_ja_man1_mans); do			\
	  jman_file=`echo $${jman} | sed -e s/jman$$/1/`;	\
	  rm -f "$(DESTDIR)$(ja_man1dir)"/$${jman_file};	\
	done

# dirty...
cutter.jman: cutter.rd.ja

SUFFIXES: .rd .man .jman .svg .png

.rd.man:
	$(RD2MAN) $< > $@

.rd.jman: # dirty...
	$(RD2MAN) $<.ja > $@

.svg.png:
	inkscape --export-png $@ $<
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
